[PATCH v2 1/3] dt-bindings: reset: ocelot: Add Sparx5 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds the support for the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/power/reset/ocelot-reset.txt       | 7 +++++--
 MAINTAINERS                                                | 1 +
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
index 1b4213eb3473..4d530d815484 100644
--- a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -1,10 +1,13 @@
 Microsemi Ocelot reset controller

 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.

 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+ - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset"

 Example:
 	reset@1070008 {
diff --git a/MAINTAINERS b/MAINTAINERS
index deaafb617361..cc70e3ab428b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11516,6 +11516,7 @@ M:	Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx>
 L:	linux-mips@xxxxxxxxxxxxxxx
 S:	Supported
 F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 F:	arch/mips/boot/dts/mscc/
 F:	arch/mips/configs/generic/board-ocelot.config
 F:	arch/mips/generic/board-ocelot.c
--
2.25.1



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux