Re: [PATCH v11 3/5] drivers/soc/litex: add LiteX SoC Controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan,

thanks for your review!

On Wed, Sep 23, 2020 at 1:58 PM Jonathan Cameron
<Jonathan.Cameron@xxxxxxxxxx> wrote:
>
> On Wed, 23 Sep 2020 12:09:06 +0200
> Mateusz Holenko <mholenko@xxxxxxxxxxxx> wrote:
>
> > From: Pawel Czarnecki <pczarnecki@xxxxxxxxxxxxxxxxxxxxxxxx>
> >
> > This commit adds driver for the FPGA-based LiteX SoC
> > Controller from LiteX SoC builder.
> >
> > Co-developed-by: Mateusz Holenko <mholenko@xxxxxxxxxxxx>
> > Signed-off-by: Mateusz Holenko <mholenko@xxxxxxxxxxxx>
> > Signed-off-by: Pawel Czarnecki <pczarnecki@xxxxxxxxxxxxxxxxxxxxxxxx>
>
> A few little things inline, but looks fine in general to me.
>
> Main request is for more formal documentation of parameters to the read
> and write functions.

You are right, the parameters should be better documented - I'll take
a look at that.
There are some other comments that suggest to replace the loop-based
generic functions
with a bunch of separate accessors - perhaps going this way would also
make it easier to understand
the code.

> Jonathan
>
> > ---
> >
> > Notes:
> >     Changes in v11:
> >     - removed an unnecessary comment left over from previous version
> >     - changed a multi-line comment to comply with the formatting rules
> >     - use WARN instad of BUG on a failed CSR validation
> >
> >     Changes in v10:
> >     - added casting to avoid sparse warnings in the SoC Controller's driver
> >
> >     Changes in v9:
> >     - added exporting of the `litex_set_reg`/`litex_get_reg` symbols
> >
> >     Changes in v8:
> >     - removed `litex_check_accessors()` helper function
> >     - added crashing (BUG) on the failed LiteX CSR access test
> >
> >     No changes in v7.
> >
> >     Changes in v6:
> >     - added dependency on OF || COMPILE_TEST
> >     - used le32_to_cpu(readl(addr)) instead of __raw_readl
> >       and writel(cpu_to_le32(value), addr) instead of __raw_writel
> >       to take advantage of memory barriers provided by readl/writel
> >
> >     Changes in v5:
> >     - removed helper accessors and used __raw_readl/__raw_writel instead
> >     - fixed checking for errors in litex_soc_ctrl_probe
> >
> >     Changes in v4:
> >     - fixed indent in Kconfig's help section
> >     - fixed copyright header
> >     - changed compatible to "litex,soc-controller"
> >     - simplified litex_soc_ctrl_probe
> >     - removed unnecessary litex_soc_ctrl_remove
> >
> >     This commit has been introduced in v3 of the patchset.
> >
> >     It includes a simplified version of common 'litex.h'
> >     header introduced in v2 of the patchset.
> >
> >  MAINTAINERS                        |   2 +
> >  drivers/soc/Kconfig                |   1 +
> >  drivers/soc/Makefile               |   1 +
> >  drivers/soc/litex/Kconfig          |  15 +++
> >  drivers/soc/litex/Makefile         |   3 +
> >  drivers/soc/litex/litex_soc_ctrl.c | 194 +++++++++++++++++++++++++++++
> >  include/linux/litex.h              |  24 ++++
> >  7 files changed, 240 insertions(+)
> >  create mode 100644 drivers/soc/litex/Kconfig
> >  create mode 100644 drivers/soc/litex/Makefile
> >  create mode 100644 drivers/soc/litex/litex_soc_ctrl.c
> >  create mode 100644 include/linux/litex.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 39be98db7418..4d70a1b22a87 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -9840,6 +9840,8 @@ M:      Karol Gugala <kgugala@xxxxxxxxxxxx>
> >  M:   Mateusz Holenko <mholenko@xxxxxxxxxxxx>
> >  S:   Maintained
> >  F:   Documentation/devicetree/bindings/*/litex,*.yaml
> > +F:   drivers/soc/litex/litex_soc_ctrl.c
> > +F:   include/linux/litex.h
> >
> >  LIVE PATCHING
> >  M:   Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
> > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> > index 425ab6f7e375..d097d070f579 100644
> > --- a/drivers/soc/Kconfig
> > +++ b/drivers/soc/Kconfig
> > @@ -9,6 +9,7 @@ source "drivers/soc/bcm/Kconfig"
> >  source "drivers/soc/fsl/Kconfig"
> >  source "drivers/soc/imx/Kconfig"
> >  source "drivers/soc/ixp4xx/Kconfig"
> > +source "drivers/soc/litex/Kconfig"
> >  source "drivers/soc/mediatek/Kconfig"
> >  source "drivers/soc/qcom/Kconfig"
> >  source "drivers/soc/renesas/Kconfig"
> > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> > index 36452bed86ef..0b16108823ef 100644
> > --- a/drivers/soc/Makefile
> > +++ b/drivers/soc/Makefile
> > @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_GEMINI)   += gemini/
> >  obj-y                                += imx/
> >  obj-$(CONFIG_ARCH_IXP4XX)    += ixp4xx/
> >  obj-$(CONFIG_SOC_XWAY)               += lantiq/
> > +obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
> >  obj-y                                += mediatek/
> >  obj-y                                += amlogic/
> >  obj-y                                += qcom/
> > diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
> > new file mode 100644
> > index 000000000000..c974ec3846bc
> > --- /dev/null
> > +++ b/drivers/soc/litex/Kconfig
> > @@ -0,0 +1,15 @@
> > +# SPDX-License_Identifier: GPL-2.0
> > +
> > +menu "Enable LiteX SoC Builder specific drivers"
> > +
> > +config LITEX_SOC_CONTROLLER
> > +     tristate "Enable LiteX SoC Controller driver"
> > +     depends on OF || COMPILE_TEST
> > +     help
> > +       This option enables the SoC Controller Driver which verifies
> > +       LiteX CSR access and provides common litex_get_reg/litex_set_reg
> > +       accessors.
> > +       All drivers that use functions from litex.h must depend on
> > +       LITEX_SOC_CONTROLLER.
> > +
> > +endmenu
> > diff --git a/drivers/soc/litex/Makefile b/drivers/soc/litex/Makefile
> > new file mode 100644
> > index 000000000000..98ff7325b1c0
> > --- /dev/null
> > +++ b/drivers/soc/litex/Makefile
> > @@ -0,0 +1,3 @@
> > +# SPDX-License_Identifier: GPL-2.0
> > +
> > +obj-$(CONFIG_LITEX_SOC_CONTROLLER)   += litex_soc_ctrl.o
> > diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
> > new file mode 100644
> > index 000000000000..08330c9872b0
> > --- /dev/null
> > +++ b/drivers/soc/litex/litex_soc_ctrl.c
> > @@ -0,0 +1,194 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * LiteX SoC Controller Driver
> > + *
> > + * Copyright (C) 2020 Antmicro <www.antmicro.com>
> > + *
> > + */
> > +
> > +#include <linux/litex.h>
> > +#include <linux/device.h>
> > +#include <linux/errno.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
>
> I'm not seeing anything from this header in use in here yet.

I'll check and remove if this is not needed.

> > +#include <linux/platform_device.h>
> > +#include <linux/printk.h>
> > +#include <linux/module.h>
> > +#include <linux/errno.h>
> > +#include <linux/io.h>
> > +
> > +/*
> > + * The parameters below are true for LiteX SoC
> > + * configured for 8-bit CSR Bus, 32-bit aligned.
> > + *
> > + * Supporting other configurations will require
> > + * extending the logic in this header.
> > + */
> > +#define LITEX_REG_SIZE             0x4
> > +#define LITEX_SUBREG_SIZE          0x1
> > +#define LITEX_SUBREG_SIZE_BIT      (LITEX_SUBREG_SIZE * 8)
> > +
> > +static DEFINE_SPINLOCK(csr_lock);
> > +
> > +/*
> > + * LiteX SoC Generator, depending on the configuration,
> > + * can split a single logical CSR (Control & Status Register)
> > + * into a series of consecutive physical registers.
> > + *
> > + * For example, in the configuration with 8-bit CSR Bus,
> > + * 32-bit aligned (the default one for 32-bit CPUs) a 32-bit
> > + * logical CSR will be generated as four 32-bit physical registers,
> > + * each one containing one byte of meaningful data.
> > + *
> > + * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
> > + *
> > + * The purpose of `litex_set_reg`/`litex_get_reg` is to implement
> > + * the logic of writing to/reading from the LiteX CSR in a single
> > + * place that can be then reused by all LiteX drivers.
> > + */
>
> I would argue in favor of formal kernel-doc for these.
> Even with this explanation the exact meaning of parameters
> isn't particularly clear.

As stated above, I'll make it clearer - either by adding a formal doc
or by splitting this function into several easier-to-understand ones.

> > +void litex_set_reg(void __iomem *reg, unsigned long reg_size,
> > +                 unsigned long val)
> > +{
> > +     unsigned long shifted_data, shift, i;
> > +     unsigned long flags;
> > +
> > +     spin_lock_irqsave(&csr_lock, flags);
> > +
> > +     for (i = 0; i < reg_size; ++i) {
> > +             shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
> > +             shifted_data = val >> shift;
> > +
> > +             writel((u32 __force)cpu_to_le32(shifted_data), reg + (LITEX_REG_SIZE * i));
> > +     }
> > +
> > +     spin_unlock_irqrestore(&csr_lock, flags);
> > +}
> > +EXPORT_SYMBOL_GPL(litex_set_reg);
> > +
> > +unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_size)
> > +{
> > +     unsigned long shifted_data, shift, i;
> > +     unsigned long result = 0;
> > +     unsigned long flags;
> > +
> > +     spin_lock_irqsave(&csr_lock, flags);
> > +
> > +     for (i = 0; i < reg_size; ++i) {
> > +             shifted_data = le32_to_cpu((__le32 __force)readl(reg + (LITEX_REG_SIZE * i)));
> > +
> > +             shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
> > +             result |= (shifted_data << shift);
> > +     }
> > +
> > +     spin_unlock_irqrestore(&csr_lock, flags);
> > +
> > +     return result;
> > +}
> > +EXPORT_SYMBOL_GPL(litex_get_reg);
> > +
> > +#define SCRATCH_REG_OFF         0x04
> > +#define SCRATCH_REG_SIZE        4
> > +#define SCRATCH_REG_VALUE       0x12345678
> > +#define SCRATCH_TEST_VALUE      0xdeadbeef
> > +
> > +/*
> > + * Check LiteX CSR read/write access
> > + *
> > + * This function reads and writes a scratch register in order
> > + * to verify if CSR access works.
> > + *
> > + * In case any problems are detected, the driver should panic.
> > + *
> > + * Access to the LiteX CSR is, by design, done in CPU native
> > + * endianness. The driver should not dynamically configure
> > + * access functions when the endianness mismatch is detected.
> > + * Such situation indicates problems in the soft SoC design
> > + * and should be solved at the LiteX generator level,
> > + * not in the software.
> > + */
> > +static int litex_check_csr_access(void __iomem *reg_addr)
> > +{
> > +     unsigned long reg;
> > +
> > +     reg = litex_get_reg(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_SIZE);
> > +
> > +     if (reg != SCRATCH_REG_VALUE) {
> > +             panic("Scratch register read error! Expected: 0x%x but got: 0x%lx",
> > +                     SCRATCH_REG_VALUE, reg);
> > +             return -EINVAL;
> > +     }
> > +
> > +     litex_set_reg(reg_addr + SCRATCH_REG_OFF,
> > +             SCRATCH_REG_SIZE, SCRATCH_TEST_VALUE);
> > +     reg = litex_get_reg(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_SIZE);
> > +
> > +     if (reg != SCRATCH_TEST_VALUE) {
> > +             panic("Scratch register write error! Expected: 0x%x but got: 0x%lx",
> > +                     SCRATCH_TEST_VALUE, reg);
> > +             return -EINVAL;
> > +     }
> > +
> > +     /* restore original value of the SCRATCH register */
> > +     litex_set_reg(reg_addr + SCRATCH_REG_OFF,
> > +             SCRATCH_REG_SIZE, SCRATCH_REG_VALUE);
> > +
> > +     pr_info("LiteX SoC Controller driver initialized");
> > +
> > +     return 0;
> > +}
> > +
> > +struct litex_soc_ctrl_device {
> > +     void __iomem *base;
> > +};
> > +
> > +static const struct of_device_id litex_soc_ctrl_of_match[] = {
> > +     {.compatible = "litex,soc-controller"},
> > +     {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, litex_soc_ctrl_of_match);
> > +
> > +static int litex_soc_ctrl_probe(struct platform_device *pdev)
> > +{
> > +     int result;
> > +     struct device *dev;
> > +     struct device_node *node;
> > +     struct litex_soc_ctrl_device *soc_ctrl_dev;
> > +
> > +     dev = &pdev->dev;
> > +     node = dev->of_node;
> > +     if (!node)
> > +             return -ENODEV;
> > +
> > +     soc_ctrl_dev = devm_kzalloc(dev, sizeof(*soc_ctrl_dev), GFP_KERNEL);
> > +     if (!soc_ctrl_dev)
> > +             return -ENOMEM;
> > +
> > +     soc_ctrl_dev->base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(soc_ctrl_dev->base))
> > +             return PTR_ERR(soc_ctrl_dev->base);
> > +
> > +     result = litex_check_csr_access(soc_ctrl_dev->base);
> > +     if (result) {
> > +             /* LiteX CSRs access is broken which means that
> > +              * none of LiteX drivers will most probably
> > +              * operate correctly
> > +              */
> > +             WARN(1, "Failed to validate CSR registers, the system is probably broken.\n");
> > +     }
> > +
> > +     return result;
> > +}
> > +
> > +static struct platform_driver litex_soc_ctrl_driver = {
> > +     .driver = {
> > +             .name = "litex-soc-controller",
> > +             .of_match_table = of_match_ptr(litex_soc_ctrl_of_match)
> > +     },
> > +     .probe = litex_soc_ctrl_probe,
> > +};
> > +
> > +module_platform_driver(litex_soc_ctrl_driver);
> > +MODULE_DESCRIPTION("LiteX SoC Controller driver");
> > +MODULE_AUTHOR("Antmicro <www.antmicro.com>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/litex.h b/include/linux/litex.h
> > new file mode 100644
> > index 000000000000..72061018c172
> > --- /dev/null
> > +++ b/include/linux/litex.h
> > @@ -0,0 +1,24 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Common LiteX header providing
> > + * helper functions for accessing CSRs.
> > + *
> > + * Implementation of the functions is provided by
> > + * the LiteX SoC Controller driver.
> > + *
> > + * Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
> > + */
> > +
> > +#ifndef _LINUX_LITEX_H
> > +#define _LINUX_LITEX_H
> > +
> > +#include <linux/io.h>
> > +#include <linux/types.h>
> > +#include <linux/compiler_types.h>
> > +
> > +void litex_set_reg(void __iomem *reg, unsigned long reg_sz, unsigned long val);
> > +
> > +unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_sz);
> > +
>
> Nitpick. One blank line is almost always enough!

Right, one blank line ought to be enough for anyone.

> > +
> > +#endif /* _LINUX_LITEX_H */
>
>

Best regards,
Mateusz


--
Mateusz Holenko
Antmicro Ltd | www.antmicro.com
Roosevelta 22, 60-829 Poznan, Poland



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux