Re: [alsa-devel] [PATCH v3 1/2] ASoC: add es8328 codec driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Jun 17, 2014 at 05:32:50PM +0800, Sean Cross wrote:
> Add a codec driver for the Everest ES8328.  It supports two separate audio
> outputs and two separate audio inputs.
> 
> Signed-off-by: Sean Cross <xobs@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/sound/es8328.txt |  18 +
>  sound/soc/codecs/Kconfig                           |  13 +
>  sound/soc/codecs/Makefile                          |   6 +
>  sound/soc/codecs/es8328-i2c.c                      |  55 ++
>  sound/soc/codecs/es8328-spi.c                      |  44 ++
>  sound/soc/codecs/es8328.c                          | 625 +++++++++++++++++++++
>  sound/soc/codecs/es8328.h                          | 313 +++++++++++
>  7 files changed, 1074 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/es8328.txt
>  create mode 100644 sound/soc/codecs/es8328-i2c.c
>  create mode 100644 sound/soc/codecs/es8328-spi.c
>  create mode 100644 sound/soc/codecs/es8328.c
>  create mode 100644 sound/soc/codecs/es8328.h
> 
> diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt
> new file mode 100644
> index 0000000..488bc32
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/es8328.txt
> @@ -0,0 +1,18 @@
> +Everest ES8328 audio CODEC
> +
> +This device supports both I2C and SPI (configured with pin strapping
> +on the board).
> +
> +Required properties:
> +
> +  - compatible : "es8328"

I suspect the vendor prefix will be mandatory.

> +
> +  - reg : the I2C address of the device for I2C, the chip select
> +          number for SPI.
> +
> +Example:
> +
> +codec: es8328@11 {
> +	compatible = "es8328";
> +	reg = <0x11>;
> +};
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index cbfa1e1..6a509e3 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -56,6 +56,8 @@ config SND_SOC_ALL_CODECS
>  	select SND_SOC_DA732X if I2C
>  	select SND_SOC_DA9055 if I2C
>  	select SND_SOC_BT_SCO
> +	select SND_SOC_ES8328_SPI if SPI_MASTER
> +	select SND_SOC_ES8328_I2C if I2C
>  	select SND_SOC_ISABELLE if I2C
>  	select SND_SOC_JZ4740_CODEC
>  	select SND_SOC_LM4857 if I2C
> @@ -396,6 +398,17 @@ config SND_SOC_DMIC
>  config SND_SOC_HDMI_CODEC
>         tristate "HDMI stub CODEC"
>  
> +config SND_SOC_ES8328
> +	tristate "Everest Semi ES8328 CODEC"
> +
> +config SND_SOC_ES8328_I2C
> +	tristate
> +	select SND_SOC_ES8328
> +
> +config SND_SOC_ES8328_SPI
> +	tristate
> +	select SND_SOC_ES8328
> +
>  config SND_SOC_ISABELLE
>          tristate
>  
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index be3377b..66e7859 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -48,6 +48,9 @@ snd-soc-da732x-objs := da732x.o
>  snd-soc-da9055-objs := da9055.o
>  snd-soc-bt-sco-objs := bt-sco.o
>  snd-soc-dmic-objs := dmic.o
> +snd-soc-es8328-objs := es8328.o
> +snd-soc-es8328-i2c-objs := es8328-i2c.o
> +snd-soc-es8328-spi-objs := es8328-spi.o
>  snd-soc-isabelle-objs := isabelle.o
>  snd-soc-jz4740-codec-objs := jz4740.o
>  snd-soc-l3-objs := l3.o
> @@ -213,6 +216,9 @@ obj-$(CONFIG_SND_SOC_DA732X)	+= snd-soc-da732x.o
>  obj-$(CONFIG_SND_SOC_DA9055)	+= snd-soc-da9055.o
>  obj-$(CONFIG_SND_SOC_BT_SCO)	+= snd-soc-bt-sco.o
>  obj-$(CONFIG_SND_SOC_DMIC)	+= snd-soc-dmic.o
> +obj-$(CONFIG_SND_SOC_ES8328)	+= snd-soc-es8328.o
> +obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
> +obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
>  obj-$(CONFIG_SND_SOC_ISABELLE)	+= snd-soc-isabelle.o
>  obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
>  obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
> diff --git a/sound/soc/codecs/es8328-i2c.c b/sound/soc/codecs/es8328-i2c.c
> new file mode 100644
> index 0000000..0bb02d3
> --- /dev/null
> +++ b/sound/soc/codecs/es8328-i2c.c
> @@ -0,0 +1,55 @@
> +/*
> + * es8328-i2c.c  --  ES8328 ALSA SoC I2C Audio driver
> + *
> + * Copyright 2014 Sutajio Ko-Usagi PTE LTD
> + *
> + * Author: Sean Cross <xobs@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +#include <sound/soc.h>
> +
> +#include "es8328.h"
> +
> +static const struct i2c_device_id es8328_id[] = {
> +	{ "es8328", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, es8328_id);
> +
> +static int es8328_i2c_probe(struct i2c_client *i2c,
> +			    const struct i2c_device_id *id)
> +{
> +	struct regmap_config config;
> +
> +	config = es8328_regmap_config;
> +	return es8328_probe(&i2c->dev, devm_regmap_init_i2c(i2c, &config));
> +}
> +
> +static int es8328_i2c_remove(struct i2c_client *i2c)
> +{
> +	snd_soc_unregister_codec(&i2c->dev);
> +	return 0;
> +}
> +
> +static struct i2c_driver es8328_i2c_driver = {
> +	.driver = {
> +		.name = "es8328",
> +	},
> +	.probe    = es8328_i2c_probe,
> +	.remove   = es8328_i2c_remove,
> +	.id_table = es8328_id,
> +};
> +
> +module_i2c_driver(es8328_i2c_driver);
> +
> +MODULE_DESCRIPTION("ASoC ES8328 audio CODEC I2C driver");
> +MODULE_AUTHOR("Sean Cross <xobs@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/soc/codecs/es8328-spi.c b/sound/soc/codecs/es8328-spi.c
> new file mode 100644
> index 0000000..28433e7
> --- /dev/null
> +++ b/sound/soc/codecs/es8328-spi.c
> @@ -0,0 +1,44 @@
> +/*
> + * es8328.c  --  ES8328 ALSA SoC SPI Audio driver
> + *
> + * Copyright 2014 Sutajio Ko-Usagi PTE LTD
> + *
> + * Author: Sean Cross <xobs@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +#include <sound/soc.h>
> +#include "es8328.h"
> +
> +static int es8328_spi_probe(struct spi_device *spi)
> +{
> +	struct regmap_config config;
> +
> +	config = es8328_regmap_config;
> +	return es8328_probe(&spi->dev, devm_regmap_init_spi(spi, &config));
> +}
> +
> +static int es8328_spi_remove(struct spi_device *spi)
> +{
> +	snd_soc_unregister_codec(&spi->dev);
> +	return 0;
> +}
> +
> +static struct spi_driver es8328_spi_driver = {
> +	.driver = {
> +		.name	= "es8328",
> +	},
> +	.probe	= es8328_spi_probe,
> +	.remove	= es8328_spi_remove,
> +};

Your of_match_table seems to have gone missing since the last
version I suspect that is why you had trouble with the vendor
prefix. Ditto for the I2C as well.

Thanks,
Charles

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux