[PATCH net-next v6 0/7] Hirschmann Hellcreek DSA driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:

 * Full duplex Ethernet interface at 100/1000 Mbps on three ports
 * IEEE 802.1Q-compliant Ethernet Switch
 * IEEE 802.1Qbv Time-Aware scheduling support
 * IEEE 1588 and IEEE 802.1AS support

That IP is used e.g. in

 https://www.arrow.com/en/campaigns/arrow-kairos

Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP and
hardware timestamping.

This version implements the DSA configure_vlan_while_not_filtering behavior by
caching any VLAN requests when vlan_filtering is not set and restoring it as
soon as it is. Due to the lack of a port forwarding matrix in hardware, VLANs
are used to reflect the initial DSA/switchdev port separation. Patch two is the
only one which changed and has to be re-reviewed. Thanks!

This work is part of the AccessTSN project: https://www.accesstsn.com/

The previous versions can be found here:

 * https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@xxxxxxxxxxxxx/
 * https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@xxxxxxxxxxxxx/
 * https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@xxxxxxxxxxxxx/
 * https://lkml.kernel.org/netdev/20200820081118.10105-1-kurt@xxxxxxxxxxxxx/
 * https://lkml.kernel.org/netdev/20200901125014.17801-1-kurt@xxxxxxxxxxxxx/
 * https://lkml.kernel.org/netdev/20200904062739.3540-1-kurt@xxxxxxxxxxxxx/

Changes since v5:

 * Implement configure_vlan_while_not_filtering behavior (Vladimir Oltean)
 * Minor cleanups

Changes since v4:

 * Fix W=1 compiler warnings (kernel test robot)
 * Add tags

Changes since v3:

 * Drop TAPRIO support (David Miller)
   => Switch to mutexes due to the lack of hrtimers
 * Use more specific compatible strings and add platform data (Andrew Lunn)
 * Fix Kconfig ordering (Andrew Lunn)

Changes since v2:

 * Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller)
 * Use "tsn" for TSN register set (Rob Herring)
 * Fix DT binding issues (Rob Herring)

Changes since v1:

 * Code simplifications (Florian Fainelli, Vladimir Oltean)
 * Fix issues with hellcreek.yaml bindings (Florian Fainelli)
 * Clear reserved field in ptp v2 event messages (Richard Cochran)
 * Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
 * Fix Kconfig (Florian Fainelli)
 * Add tags (Florian Fainelli, Rob Herring, Richard Cochran) 

Changes since RFC ordered by reviewers:

 * Andrew Lunn
   * Use dev_dbg for debug messages
   * Get rid of __ function names where possible
   * Use reverse xmas tree variable ordering
   * Remove redundant/useless checks
   * Improve comments e.g. for PTP
   * Fix Kconfig ordering
   * Make LED handling more generic and provide info via DT
   * Setup advertisement of PHYs according to hardware
   * Drop debugfs patch
 * Jakub Kicinski
   * Fix compiler warnings
 * Florian Fainelli
   * Switch to YAML DT bindings
 * Richard Cochran
   * Fix typo
   * Add missing NULL checks

Kamil Alkhouri (2):
  net: dsa: hellcreek: Add PTP clock support
  net: dsa: hellcreek: Add support for hardware timestamping

Kurt Kanzenbach (5):
  net: dsa: Add tag handling for Hirschmann Hellcreek switches
  net: dsa: Add DSA driver for Hirschmann Hellcreek switches
  net: dsa: hellcreek: Add PTP status LEDs
  dt-bindings: Add vendor prefix for Hirschmann
  dt-bindings: net: dsa: Add documentation for Hellcreek switches

 .../bindings/net/dsa/hellcreek.yaml           |  127 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/net/dsa/Kconfig                       |    2 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/hirschmann/Kconfig            |    9 +
 drivers/net/dsa/hirschmann/Makefile           |    5 +
 drivers/net/dsa/hirschmann/hellcreek.c        | 1371 +++++++++++++++++
 drivers/net/dsa/hirschmann/hellcreek.h        |  292 ++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.c   |  479 ++++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.h   |   58 +
 drivers/net/dsa/hirschmann/hellcreek_ptp.c    |  452 ++++++
 drivers/net/dsa/hirschmann/hellcreek_ptp.h    |   76 +
 .../platform_data/hirschmann-hellcreek.h      |   23 +
 include/net/dsa.h                             |    2 +
 net/dsa/Kconfig                               |    6 +
 net/dsa/Makefile                              |    1 +
 net/dsa/tag_hellcreek.c                       |  101 ++
 17 files changed, 3007 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml
 create mode 100644 drivers/net/dsa/hirschmann/Kconfig
 create mode 100644 drivers/net/dsa/hirschmann/Makefile
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h
 create mode 100644 include/linux/platform_data/hirschmann-hellcreek.h
 create mode 100644 net/dsa/tag_hellcreek.c

-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux