This patch set aims to add the necessary DTS nodes to complete the MAC/PCS/PHY representation on DPAA2 devices. The external MDIO bus nodes and the PHYs found on them are added, along with the PCS MDIO internal buses and their PCS PHYs. Also, links to these PHYs are added from the DPMAC node. I am resending these via netdev because I am not really sure if Shawn is still able to take them in time for 5.10 since his last activity on the tree has been some time ago. I tested them on linux-next and there are no conflicts. Changes in v2: - documented the dpmac node into a new yaml entry - dropped the '0x' from some unit addresses Ioana Ciornei (10): dt-bindings: net: add the dpaa2-mac DTS definition arm64: dts: ls1088a: add external MDIO device nodes arm64: dts: ls1088ardb: add QSGMII PHY nodes arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2 arm64: dts: ls208xa: add the external MDIO nodes arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs .../devicetree/bindings/net/dpaa2-mac.yaml | 55 ++++ .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 119 +++++++++ .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 81 ++++++ .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 118 ++++++++ .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 242 +++++++++++++++++ .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 32 +++ .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 252 ++++++++++++++++++ 7 files changed, 899 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dpaa2-mac.yaml -- 2.28.0
