Add device tree support to extcon-gpio driver.
Add devicetree binding documentation
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
.../devicetree/bindings/extcon/extcon-gpio.txt | 34 ++++++++++++++++++++++
drivers/extcon/extcon-gpio.c | 29 ++++++++++++++++++
2 files changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
new file mode 100644
index 0000000..80b791b
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -0,0 +1,34 @@
+GPIO based EXTCON
+
+EXTCON GPIO
+-----------
+
+Required Properties:
+ - compatible: should be:
+ * "ti,extcon-gpio"
+ - gpios: specifies the gpio pin used.
+ - debounce: Debounce time for GPIO IRQ in ms
+ - irq-flags: IRQ flag to be used ( eg: IRQ_TYPE_EDGE_FALLING)
+
+Optional Properties:
+ - gpio-active-low: Property describing whether gpio active state is 1 or 0
+ If defined , low state of gpio means active.
+ - check-on-resume: Property describing whether to check the gpio state
+ while resuming from SLEEP.
+ - state-on: print_state is overriden with state_on string if provided.
+ If NULL, default method of extcon class is used.
+ - state_off: print_state is overriden with state_off string if provided.
+ If NUll, default method of extcon class is used.
+
+Eg:
+
+ extcon1: am43_usbid_extcon1 {
+ compatible = "ti,extcon-gpio";
+ gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ gpio-active-low;
+ debounce = <20>;
+ irq-flags = <IRQ_TYPE_EDGE_FALLING>;
+ state-on = "USB ID FLOAT";
+ state-off = "USB ID GND";
+
+ };
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 6c268b4..14d999d 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
@@ -83,12 +84,34 @@ static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
static int gpio_extcon_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct gpio_extcon_data *extcon_data;
int ret;
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->gpio = of_get_gpio(np, 0);
+ if (!gpio_is_valid(pdata->gpio))
+ return -EPROBE_DEFER;
+
+ pdata->name = np->name;
+ pdata->gpio_active_low = of_property_read_bool(np,
+ "gpio-active-low");
+ pdata->check_on_resume = of_property_read_bool(np,
+ "check-on-resume");
+ of_property_read_u32(np, "debounce", (u32 *)&pdata->debounce);
+ of_property_read_u32(np, "irq-flags", (u32 *)&pdata->irq_flags);
+ of_property_read_string(np, "state-on", &pdata->state_on);
+ of_property_read_string(np, "state-off", &pdata->state_off);
+ }
+
if (!pdata)
return -EBUSY;
+
if (!pdata->irq_flags) {
dev_err(&pdev->dev, "IRQ flag is not specified.\n");
return -EINVAL;
@@ -177,6 +200,11 @@ static int gpio_extcon_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
+static struct of_device_id of_extcon_gpio_match_tbl[] = {
+ { .compatible = "ti,extcon-gpio", },
+ { /* end */ }
+};
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
@@ -184,6 +212,7 @@ static struct platform_driver gpio_extcon_driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
.pm = &gpio_extcon_pm_ops,
+ .of_match_table = of_extcon_gpio_match_tbl,
},
};
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
