Annotate the EMDIO2 node and describe the other 4 10GBASER PHYs found on the LS2088ARDB board. Also, add phy-handles for DPMACs 5-8 to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx> --- .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index 0d1935fcd201..0492c9f76490 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -39,6 +39,22 @@ &dpmac4 { phy-handle = <&mdio1_phy4>; }; +&dpmac5 { + phy-handle = <&mdio2_phy1>; +}; + +&dpmac6 { + phy-handle = <&mdio2_phy2>; +}; + +&dpmac7 { + phy-handle = <&mdio2_phy3>; +}; + +&dpmac8 { + phy-handle = <&mdio2_phy4>; +}; + &emdio1 { status = "okay"; @@ -63,3 +79,32 @@ mdio1_phy4: emdio1_phy@4 { phy-connection-type = "10gbase-r"; }; }; + +&emdio2 { + status = "okay"; + + mdio2_phy1: emdio2_phy@1 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts = <0 1 0x4>; + reg = <0x0>; + phy-connection-type = "10gbase-r"; + }; + mdio2_phy2: emdio2_phy@2 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts = <0 2 0x4>; + reg = <0x1>; + phy-connection-type = "10gbase-r"; + }; + mdio2_phy3: emdio2_phy@3 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts = <0 4 0x4>; + reg = <0x2>; + phy-connection-type = "10gbase-r"; + }; + mdio2_phy4: emdio2_phy@4 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts = <0 5 0x4>; + reg = <0x3>; + phy-connection-type = "10gbase-r"; + }; +}; -- 2.28.0