Re: [PATCH 2/2] arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card

[Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>]

On 01.10.20 14:34, Schrempf Frieder wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>
> In order to use ultra high speed modes (UHS) on the SD card slot, we
> add matching pinctrls and fix the voltage switching for LDO5 of the
> PMIC, by providing the SD_VSEL pin as GPIO to the PMIC driver.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

Sorry, forgot to mention that this depends on the board support patch:
https://patchwork.kernel.org/patch/11811347/

> ---
>   .../dts/freescale/imx8mm-kontron-n801x-s.dts  | 27 +++++++++++++++++++
>   .../freescale/imx8mm-kontron-n801x-som.dtsi   |  2 ++
>   2 files changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> index 389e735b2880..6913aefa56aa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
> @@ -190,8 +190,11 @@
>   };
>   
>   &usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pinctrl_usdhc2>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
>   	vmmc-supply = <&reg_vdd_3v3>;
>   	vqmmc-supply = <&reg_nvcc_sd>;
>   	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> @@ -320,4 +323,28 @@
>   			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
>   		>;
>   	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
> +			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
> +			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
> +		>;
> +	};
>   };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> index 5c6a660f4395..282a56fb3949 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
> @@ -85,6 +85,7 @@
>   		pinctrl-0 = <&pinctrl_pmic>;
>   		interrupt-parent = <&gpio1>;
>   		interrupts = <0 GPIO_ACTIVE_LOW>;
> +		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>   
>   		regulators {
>   			reg_vdd_soc: BUCK1 {
> @@ -224,6 +225,7 @@
>   	pinctrl_pmic: pmicgrp {
>   		fsl,pins = <
>   			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x41
> +			MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x41
>   		>;
>   	};
>