Re: [PATCH v2 5/5] PCI: qcom: Add support for configuring BDF to SID mapping for SM8250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stan,

On Thu, Oct 01, 2020 at 01:57:59PM +0300, Stanimir Varbanov wrote:
> Hi Mani,
> 
> On 10/1/20 8:57 AM, Manivannan Sadhasivam wrote:
> > Hi Stan,
> > 
> > On Thu, Oct 01, 2020 at 12:46:46AM +0300, Stanimir Varbanov wrote:
> >> Hi Mani,
> >>
> >> On 9/30/20 6:09 PM, Manivannan Sadhasivam wrote:
> >>> For SM8250, we need to write the BDF to SID mapping in PCIe controller
> >>> register space for proper working. This is accomplished by extracting
> >>> the BDF and SID values from "iommu-map" property in DT and writing those
> >>> in the register address calculated from the hash value of BDF. In case
> >>> of collisions, the index of the next entry will also be written.
> >>
> >> This describes what the patch is doing. But why? Is that done in the
> >> other DWC low-level drivers or this is qcom specialty?
> >>
> > 
> > AFAIK, only some NXP SoCs deal with similar kind of mapping but right now
> > this is a Qcom only stuff.
> > 
> >>>
> >>> For the sake of it, let's introduce a "config_sid" callback and do it
> >>> conditionally for SM8250.
> >>>
> >>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> >>> ---
> >>>  drivers/pci/controller/dwc/Kconfig     |   1 +
> >>>  drivers/pci/controller/dwc/pcie-qcom.c | 138 +++++++++++++++++++++++++
> >>>  2 files changed, 139 insertions(+)
> 
> <snip>
> 
> >>>  
> >>> +static int qcom_pcie_get_iommu_map(struct qcom_pcie *pcie)
> >>> +{
> >>> +	/* iommu map structure */
> >>> +	struct {
> >>> +		u32 bdf;
> >>> +		u32 phandle;
> >>> +		u32 smmu_sid;
> >>> +		u32 smmu_sid_len;
> >>> +	} *map;
> >>> +	struct device *dev = pcie->pci->dev;
> >>> +	int i, size = 0;
> >>> +	u32 smmu_sid_base;
> >>> +
> >>> +	of_get_property(dev->of_node, "iommu-map", &size);
> >>> +	if (!size)
> >>> +		return 0;
> >>> +
> >>> +	map = kzalloc(size, GFP_KERNEL);
> >>> +	if (!map)
> >>> +		return -ENOMEM;
> >>> +
> >>> +	of_property_read_u32_array(dev->of_node,
> >>> +		"iommu-map", (u32 *)map, size / sizeof(u32));
> >>
> >> iommu-map is a standard DT property why we have to parse it manually?
> >>
> > 
> > So right now we don't have a way to pass this information from DT. And there
> > is no IOMMU API to parse the fields also. We need to extract this information
> > to program the hash tables (BDF, SID) as the mapping between BDF and SID is not
> > 1:1 in SM8250.
> 
> We used iommu-map for msm8998 see this commit:
> 
> b84dfd175c09888751f501e471fdca346f582e06
> ("arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes")
> 

The iommu-map property will be present in most of the SoCs as needed for the
SMMU translation of DMA transfers. But in the case of SM8250, we need to map the
BDF (Bus Device Function) identifier (aka RID) to the SMMU Stream ID (SID)
in the PCIe controller, and we get that information from existing iommu-map
property.

Thanks,
Mani

> I also Cc-ed Marc if he knows something more.
> 
> > 
> > Perhaps I can add this information in commit message.
> 
> 
> -- 
> regards,
> Stan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux