[PATCH v2 11/21] spi: dw: Unmask IRQs after enabling the chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's theoretically erroneous to enable IRQ before the chip is turned on.
If IRQ handler gets executed before the chip is enabled, then any data
written to the Tx FIFO will be just ignored.

I say "theoretically" because we haven't noticed any problem with that,
but let's fix it anyway just in case...

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/spi/spi-dw-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index db3fec4195f7..58a7c7465c61 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -376,8 +376,6 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 			spi_enable_chip(dws, 1);
 			return ret;
 		}
-	} else {
-		dw_spi_irq_setup(dws);
 	}
 
 	spi_enable_chip(dws, 1);
@@ -385,6 +383,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 	if (dws->dma_mapped)
 		return dws->dma_ops->dma_transfer(dws, transfer);
 
+	dw_spi_irq_setup(dws);
+
 	return 1;
 }
 
-- 
2.27.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux