Convert MediaTek SMI to DT schema.
Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
---
.../mediatek,smi-common.txt | 49 ---------
.../mediatek,smi-common.yaml | 100 ++++++++++++++++++
.../memory-controllers/mediatek,smi-larb.txt | 49 ---------
.../memory-controllers/mediatek,smi-larb.yaml | 91 ++++++++++++++++
4 files changed, 191 insertions(+), 98 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
deleted file mode 100644
index b64573680b42..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-SMI (Smart Multimedia Interface) Common
-
-The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
-
-Mediatek SMI have two generations of HW architecture, here is the list
-which generation the SoCs use:
-generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt6779, mt8173 and mt8183.
-
-There's slight differences between the two SMI, for generation 2, the
-register which control the iommu port is at each larb's register base. But
-for generation 1, the register is at smi ao base(smi always on register
-base). Besides that, the smi async clock should be prepared and enabled for
-SMI generation 1 to transform the smi clock into emi clock domain, but that is
-not needed for SMI generation 2.
-
-Required properties:
-- compatible : must be one of :
- "mediatek,mt2701-smi-common"
- "mediatek,mt2712-smi-common"
- "mediatek,mt6779-smi-common"
- "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
- "mediatek,mt8173-smi-common"
- "mediatek,mt8183-smi-common"
-- reg : the register and size of the SMI block.
-- power-domains : a phandle to the power domain of this local arbiter.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
- for generation 2 smi HW as follows:
- - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
- the register.
- - "smi" : It's the clock for transfer data and command.
- They may be the same if both source clocks are the same.
- - "async" : asynchronous clock, it help transform the smi clock into the emi
- clock domain, this clock is only needed by generation 1 smi HW.
- and these 2 option clocks for generation 2 smi HW:
- - "gals0": the path0 clock of GALS(Global Async Local Sync).
- - "gals1": the path1 clock of GALS(Global Async Local Sync).
- Here is the list which has this GALS: mt6779 and mt8183.
-
-Example:
- smi_common: smi@14022000 {
- compatible = "mediatek,mt8173-smi-common";
- reg = <0 0x14022000 0 0x1000>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
- clocks = <&mmsys CLK_MM_SMI_COMMON>,
- <&mmsys CLK_MM_SMI_COMMON>;
- clock-names = "apb", "smi";
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
new file mode 100644
index 000000000000..76ecc7205438
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Common
+
+maintainers:
+ - Yong Wu <yong.wu@xxxxxxxxxxxx>
+
+description: |+
+ The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+ MediaTek SMI have two generations of HW architecture, here is the list
+ which generation the SoCs use:
+ generation 1: mt2701 and mt7623.
+ generation 2: mt2712, mt6779, mt8173 and mt8183.
+
+ There's slight differences between the two SMI, for generation 2, the
+ register which control the iommu port is at each larb's register base. But
+ for generation 1, the register is at smi ao base(smi always on register
+ base). Besides that, the smi async clock should be prepared and enabled for
+ SMI generation 1 to transform the smi clock into emi clock domain, but that is
+ not needed for SMI generation 2.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-smi-common
+ - mediatek,mt2712-smi-common
+ - mediatek,mt6779-smi-common
+ - mediatek,mt8173-smi-common
+ - mediatek,mt8183-smi-common
+
+ - description: for mt7623
+ items:
+ - const: mediatek,mt7623-smi-common
+ - const: mediatek,mt2701-smi-common
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ apb and smi are mandatory. the async is only for generation 1 smi HW.
+ gals(global async local sync) also is optional, here is the list which
+ require gals: mt6779 and mt8183.
+ minItems: 2
+ maxItems: 4
+ items:
+ - description: apb is Advanced Peripheral Bus clock, It's the clock for
+ setting the register.
+ - description: smi is the clock for transfer data and command.
+ - description: async is asynchronous clock, it help transform the smi clock
+ into the emi clock domain.
+ - description: gals0 is the path0 clock of gals.
+ - description: gals1 is the path1 clock of gals.
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: apb
+ - const: smi
+ - items:
+ - const: apb
+ - const: smi
+ - const: async
+ - items:
+ - const: apb
+ - const: smi
+ - const: gals0
+ - const: gals1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ smi_common: smi@14022000 {
+ compatible = "mediatek,mt8173-smi-common";
+ reg = <0x14022000 0x1000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_COMMON>;
+ clock-names = "apb", "smi";
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
deleted file mode 100644
index 8f19dfe7d80e..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-SMI (Smart Multimedia Interface) Local Arbiter
-
-The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
-
-Required properties:
-- compatible : must be one of :
- "mediatek,mt2701-smi-larb"
- "mediatek,mt2712-smi-larb"
- "mediatek,mt6779-smi-larb"
- "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
- "mediatek,mt8173-smi-larb"
- "mediatek,mt8183-smi-larb"
-- reg : the register and size of this local arbiter.
-- mediatek,smi : a phandle to the smi_common node.
-- power-domains : a phandle to the power domain of this local arbiter.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: must contain 2 entries, as follows:
- - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
- the register.
- - "smi" : It's the clock for transfer data and command.
- and this optional clock name:
- - "gals": the clock for GALS(Global Async Local Sync).
- Here is the list which has this GALS: mt8183.
-
-Required property for mt2701, mt2712, mt6779 and mt7623:
-- mediatek,larb-id :the hardware id of this larb.
-
-Example:
- larb1: larb@16010000 {
- compatible = "mediatek,mt8173-smi-larb";
- reg = <0 0x16010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
- clocks = <&vdecsys CLK_VDEC_CKEN>,
- <&vdecsys CLK_VDEC_LARB_CKEN>;
- clock-names = "apb", "smi";
- };
-
-Example for mt2701:
- larb0: larb@14010000 {
- compatible = "mediatek,mt2701-smi-larb";
- reg = <0 0x14010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <0>;
- clocks = <&mmsys CLK_MM_SMI_LARB0>,
- <&mmsys CLK_MM_SMI_LARB0>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
new file mode 100644
index 000000000000..50793a0e6759
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Local Arbiter
+
+maintainers:
+ - Yong Wu <yong.wu@xxxxxxxxxxxx>
+
+description: |+
+ The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-smi-larb
+ - mediatek,mt2712-smi-larb
+ - mediatek,mt6779-smi-larb
+ - mediatek,mt8173-smi-larb
+ - mediatek,mt8183-smi-larb
+
+ - description: for mt7623
+ items:
+ - const: mediatek,mt7623-smi-larb
+ - const: mediatek,mt2701-smi-larb
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ apb and smi are mandatory. gals(global async local sync) is optional,
+ here is the list which require gals: mt8183.
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: apb is Advanced Peripheral Bus clock, It's the clock for
+ setting the register.
+ - description: smi is the clock for transfer data and command.
+ - description: the clock for gals.
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: apb
+ - const: smi
+ - items:
+ - const: apb
+ - const: smi
+ - const: gals
+
+ power-domains:
+ maxItems: 1
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: a phandle to the smi_common node.
+
+ mediatek,larb-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description: the hardware id of this larb.
+ Required property for mt2701, mt2712, mt6779 and mt7623.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt8173-smi-larb";
+ reg = <0x16010000 0x1000>;
+ mediatek,smi = <&smi_common>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+ clocks = <&vdecsys CLK_VDEC_CKEN>,
+ <&vdecsys CLK_VDEC_LARB_CKEN>;
+ clock-names = "apb", "smi";
+ };
--
2.18.0
