Hi Zhen Lei, On 2020/9/29 22:14, Zhen Lei wrote: > From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx> > > Add support of early console for SD5203. > > Signed-off-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx> > Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx> Thanks! Applied to the hisilicon arm32 SoC tree. Best Regards, Wei > --- > arch/arm/Kconfig.debug | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 80000a66a4e3549..d27a7764c3bfb46 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -1086,6 +1086,14 @@ choice > on SA-11x0 UART ports. The kernel will check for the first > enabled UART in a sequence 3-1-2. > > + config DEBUG_SD5203_UART > + bool "Hisilicon SD5203 Debug UART" > + depends on ARCH_SD5203 > + select DEBUG_UART_8250 > + help > + Say Y here if you want kernel low-level debugging support > + on SD5203 UART. > + > config DEBUG_SOCFPGA_UART0 > depends on ARCH_SOCFPGA > bool "Use SOCFPGA UART0 for low-level debug" > @@ -1639,6 +1647,7 @@ config DEBUG_UART_PHYS > default 0x11006000 if DEBUG_MT6589_UART0 > default 0x11009000 if DEBUG_MT8135_UART3 > default 0x16000000 if DEBUG_INTEGRATOR > + default 0x1600d000 if DEBUG_SD5203_UART > default 0x18000300 if DEBUG_BCM_5301X > default 0x18000400 if DEBUG_BCM_HR2 > default 0x18010000 if DEBUG_SIRFATLAS7_UART0 > @@ -1841,7 +1850,7 @@ config DEBUG_UART_VIRT > default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 > default 0xfec90000 if DEBUG_RK32_UART2 > default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 > - default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 > + default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART > default 0xfed60000 if DEBUG_RK29_UART0 > default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 > default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 >
