Re: [PATCH v4 2/2] USB: misc: Add onboard_usb_hub driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 29, 2020 at 12:00:36PM -0400, Alan Stern wrote:
> On Mon, Sep 28, 2020 at 06:43:55PM -0700, Matthias Kaehlcke wrote:
> > > Have you tried manually unbinding and rebinding the two drivers a few
> > > times to make sure they will still work?
> > 
> > I went through a few dozen bund/unbind cycles for both drivers and things
> > looked good overall, but then last minute I found that determining whether
> > wakeup capable devices are connected doesn't always work as (I) expected.
> > I didn't see this earlier, it seems to be reproduce more easily after
> > unbinding and rebinding the platform driver.
> > 
> > During development I already noticed that usb_wakeup_enabled_descendants()
> > returns a cached value, which was a problem for an earlier version of the
> > driver. The values are updated by hub_suspend(), my (flawed) assumption
> > was that the USB driver would always suspend before the platform driver.
> > This generally seems to be the case on my development platform after boot,
> > but not necessarily after unbinding and rebinding the driver. Using the
> > _suspend_late hook instead of _suspend seems to be a reliable workaround.
> 
> Yes, for unrelated (i.e., not in a parent-child relation) devices, the 
> PM subsystem doesn't guarantee ordering of suspend and resume callbacks.  
> You can enforce the ordering by using device_pm_wait_for_dev().  But the 
> suspend_late approach seems like a better solution in this case.

Thanks for the confirmation. Good to know about device_pm_wait_for_dev(),
even if we are not going to use it in this case.

> > > I'm a little concerned about  all the devm_* stuff in here; does that
> > > get released when the driver is unbound from the device or when the device
> > > is unregistered?  And if the latter, what happens if you have multiple
> > > sysfs attribute groups going at the same time?
> > 
> > The memory gets released when the device is unbound:
> > 
> > device_release_driver
> >   device_release_driver_internal
> >     __device_release_driver
> >       devres_release_all
> > 
> > Anyway, if you prefer I can change the driver to use kmalloc/kfree.
> 
> No, that's fine.  I just wasn't sure about this and wanted to check.

I think the only concern would be a scenario where the USB devices are
unbound and rebound over and over again, which would result in a
struct udev_node being kept around for every bind until the platform
device is removed. It seems unlikely and shouldn't be a big problem
as long as the number of bind/unbind cycles is in the thousands rather
than millions.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux