On 06/15/2014 11:47 PM, Heiko Schocher wrote:
Driver for the TI TMP103.
The TI TMP103 is similar to the TMP102. It differs from the TMP102
by having only 8 bit registers.
Signed-off-by: Heiko Schocher <hs@xxxxxxx>
Hello Heiko,
Almost there.
---
+static int tmp103_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct regmap *regmap;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev,
+ "adapter doesn't support SMBus byte transactions\n");
+ return -ENODEV;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &tmp103_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(regmap);
+ }
+
+ ret = regmap_update_bits(regmap, TMP103_CONF_REG, TMP103_CONFIG,
+ TMP103_CONFIG);
You actually want to mask out CR0, CR1, M0, and M1 here.
+ if (ret < 0) {
+ dev_err(&client->dev, "error writing config register\n");
+ return ret;
+ }
+
+ hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
+ regmap, tmp103_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+#ifdef CONFIG_PM
+static int tmp103_suspend(struct device *dev)
+{
+ struct regmap *regmap = dev_get_drvdata(dev);
+
+ return regmap_update_bits(regmap, TMP103_CONF_REG, TMP103_CONF_SD, 0);
+}
+
+static int tmp103_resume(struct device *dev)
+{
+ struct regmap *regmap = dev_get_drvdata(dev);
+
+ return regmap_update_bits(regmap, TMP103_CONF_REG, TMP103_CONF_SD,
+ TMP103_CONF_SD);
That changes {M0, M1} to {1, 1}, but you really want {0, 1} to restore the
pre-suspend configuration.
One solution for both would be to define TMP103_CONFIG_MASK and TMP103_CONF_SD_MASK
separately to ensure you catch all the to-be-cleared bits.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
