Convert the Hisilicon Hip06 SoCs implement a Low Pin Count (LPC)
controller binding to DT schema format using json-schema.
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
.../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ------------
.../bindings/arm/hisilicon/low-pin-count.yaml | 61 ++++++++++++++++++++++
2 files changed, 61 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
deleted file mode 100644
index 10bd35f9207f2ee..000000000000000
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Hisilicon Hip06 Low Pin Count device
- Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
- provides I/O access to some legacy ISA devices.
- Hip06 is based on arm64 architecture where there is no I/O space. So, the
- I/O ports here are not CPU addresses, and there is no 'ranges' property in
- LPC device node.
-
-Required properties:
-- compatible: value should be as follows:
- (a) "hisilicon,hip06-lpc"
- (b) "hisilicon,hip07-lpc"
-- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
-- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
-- reg: base memory range where the LPC register set is mapped.
-
-Note:
- The node name before '@' must be "isa" to represent the binding stick to the
- ISA/EISA binding specification.
-
-Example:
-
-isa@a01b0000 {
- compatible = "hisilicon,hip06-lpc";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x0 0xa01b0000 0x0 0x1000>;
-
- ipmi0: bt@e4 {
- compatible = "ipmi-bt";
- device_type = "ipmi";
- reg = <0x01 0xe4 0x04>;
- };
-};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
new file mode 100644
index 000000000000000..3b36e683bb1511d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiP06 Low Pin Count device
+
+maintainers:
+ - Wei Xu <xuwei5@xxxxxxxxxxxxx>
+
+description: |
+ Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which
+ provides I/O access to some legacy ISA devices.
+ HiP06 is based on arm64 architecture where there is no I/O space. So, the
+ I/O ports here are not CPU addresses, and there is no 'ranges' property in
+ LPC device node.
+
+properties:
+ $nodename:
+ pattern: '^isa@[0-9a-f]+$'
+ description: |
+ The node name before '@' must be "isa" to represent the binding stick
+ to the ISA/EISA binding specification.
+
+ compatible:
+ enum:
+ - hisilicon,hip06-lpc
+ - hisilicon,hip07-lpc
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ isa@a01b0000 {
+ compatible = "hisilicon,hip06-lpc";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xa01b0000 0x1000>;
+
+ ipmi0: bt@e4 {
+ compatible = "ipmi-bt";
+ device_type = "ipmi";
+ reg = <0x01 0xe4 0x04>;
+ };
+ };
+...
--
1.8.3
