Reviewed-by: Maxim Kochetkov <fido_max@xxxxxxxx> 29.09.2020 14:32, Vladimir Oltean пишет:
Add the description of the embedded L2 switch inside the SoC dtsi file for NXP T1040. Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> --- Changes in v2: Make switch node disabled by default. arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 76 +++++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 315d0557eefc..5cb90c66cd3f 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -628,6 +628,82 @@ mdio@fd000 { status = "disabled"; }; }; + + seville_switch: ethernet-switch@800000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + little-endian; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + seville_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + seville_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + seville_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + seville_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + seville_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + seville_port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + seville_port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + seville_port7: port@7 { + reg = <7>; + status = "disabled"; + }; + + seville_port8: port@8 { + reg = <8>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + seville_port9: port@9 { + reg = <9>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; };&qe {
