Re: [PATCH v2 3/3] hwmon: (lm75) Add regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 28, 2020 at 05:39:23PM +0200, Alban Bedel wrote:
> Add regulator support for boards where the sensor first need to be
> powered up before it can be used.
> 
> Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxx>
> ---
> v2: Rely on dummy regulators instead of explicitly handling missing
>     regulator
> ---
>  drivers/hwmon/lm75.c | 23 +++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index ba0be48aeadd..e394df648c26 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -17,6 +17,7 @@
>  #include <linux/of.h>
>  #include <linux/regmap.h>
>  #include <linux/util_macros.h>
> +#include <linux/regulator/consumer.h>
>  #include "lm75.h"
>  
>  /*
> @@ -101,6 +102,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
>  struct lm75_data {
>  	struct i2c_client		*client;
>  	struct regmap			*regmap;
> +	struct regulator		*vs;
>  	u8				orig_conf;
>  	u8				current_conf;
>  	u8				resolution;	/* In bits, 9 to 16 */
> @@ -540,6 +542,7 @@ static void lm75_remove(void *data)
>  	struct i2c_client *client = lm75->client;
>  
>  	i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
> +	regulator_disable(lm75->vs);
>  }
>  
>  static int
> @@ -567,6 +570,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	data->client = client;
>  	data->kind = kind;
>  
> +	data->vs = devm_regulator_get(dev, "vs");
> +	if (IS_ERR(data->vs))
> +		return PTR_ERR(data->vs);
> +
>  	data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
>  	if (IS_ERR(data->regmap))
>  		return PTR_ERR(data->regmap);
> @@ -581,11 +588,19 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	data->sample_time = data->params->default_sample_time;
>  	data->resolution = data->params->default_resolution;
>  
> +	/* Enable the power */
> +	err = regulator_enable(data->vs);
> +	if (err) {
> +		dev_err(dev, "failed to enable regulator: %d\n", err);
> +		return err;
> +	}
> +
>  	/* Cache original configuration */
>  	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
>  	if (status < 0) {
>  		dev_dbg(dev, "Can't read config? %d\n", status);
> -		return status;
> +		err = status;
> +		goto disable_regulator;

The point of using devm_add_action_or_reset() was specifically to avoid having
to have the cleanup gotos. On top of that, the lm75_remove() function was
specifically intended to clean up configuration data, not to do anything else.
While hijacking lm75_remove() to also disable the regulator is technically
correct, it makes the code more difficult to understand, and it creates a
potential source for subsequently introduced bugs. Right now I am not inclined
to accept this code as-is. Please provide arguments for handling the cleanup
this way instead of using devm_add_action_or_reset().

Thanks,
Guenter



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux