Re: [PATCH v3 21/21] dt-bindings: arm: hisilicon: convert LPC controller bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2020/9/28 17:52, Jonathan Cameron wrote:
> On Sun, 27 Sep 2020 14:21:29 +0800
> Zhen Lei <thunder.leizhen@xxxxxxxxxx> wrote:
> 
>> Convert the Hisilicon Hip06 SoCs implement a Low Pin Count (LPC)
>> controller binding to DT schema format using json-schema.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
> 
> As only single entries in the oneOf, can just use an enum.

Oh, yes, using enum will look simpler.

> 
> Thanks,
> 
> Jonathan
> 
>> ---
>>  .../arm/hisilicon/hisilicon-low-pin-count.txt      | 33 ------------
>>  .../arm/hisilicon/hisilicon-low-pin-count.yaml     | 63 ++++++++++++++++++++++
>>  2 files changed, 63 insertions(+), 33 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
>> deleted file mode 100644
>> index 10bd35f9207f2ee..000000000000000
>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
>> +++ /dev/null
>> @@ -1,33 +0,0 @@
>> -Hisilicon Hip06 Low Pin Count device
>> -  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
>> -  provides I/O access to some legacy ISA devices.
>> -  Hip06 is based on arm64 architecture where there is no I/O space. So, the
>> -  I/O ports here are not CPU addresses, and there is no 'ranges' property in
>> -  LPC device node.
>> -
>> -Required properties:
>> -- compatible:  value should be as follows:
>> -	(a) "hisilicon,hip06-lpc"
>> -	(b) "hisilicon,hip07-lpc"
>> -- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
>> -- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
>> -- reg: base memory range where the LPC register set is mapped.
>> -
>> -Note:
>> -  The node name before '@' must be "isa" to represent the binding stick to the
>> -  ISA/EISA binding specification.
>> -
>> -Example:
>> -
>> -isa@a01b0000 {
>> -	compatible = "hisilicon,hip06-lpc";
>> -	#address-cells = <2>;
>> -	#size-cells = <1>;
>> -	reg = <0x0 0xa01b0000 0x0 0x1000>;
>> -
>> -	ipmi0: bt@e4 {
>> -		compatible = "ipmi-bt";
>> -		device_type = "ipmi";
>> -		reg = <0x01 0xe4 0x04>;
>> -	};
>> -};
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.yaml
>> new file mode 100644
>> index 000000000000000..a43f8b65547c10f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.yaml
>> @@ -0,0 +1,63 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon-low-pin-count.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Hisilicon Hip06 Low Pin Count device
>> +
>> +maintainers:
>> +  - Wei Xu <xuwei5@xxxxxxxxxxxxx>
>> +
>> +description: |
>> +  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
>> +  provides I/O access to some legacy ISA devices.
>> +  Hip06 is based on arm64 architecture where there is no I/O space. So, the
>> +  I/O ports here are not CPU addresses, and there is no 'ranges' property in
>> +  LPC device node.
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: '^isa@[0-9a-f]+$'
>> +    description: |
>> +      The node name before '@' must be "isa" to represent the binding stick
>> +      to the ISA/EISA binding specification.
>> +
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +        - const: hisilicon,hip06-lpc
>> +      - items:
>> +        - const: hisilicon,hip07-lpc
> 
>        enum:
>          - hisilicon,hip06-lpc
>          - hisilicon,hip07-lpc
> 
>> +
>> +  reg:
>> +    description: base memory range where the LPC register set is mapped.
>> +    maxItems: 1
>> +
>> +  '#address-cells':
>> +    description: must be 2 which stick to the ISA/EISA binding doc.
>> +    const: 2
>> +
>> +  '#size-cells':
>> +    description: must be 1 which stick to the ISA/EISA binding doc.
>> +    const: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +examples:
>> +  - |
>> +    isa@a01b0000 {
>> +        compatible = "hisilicon,hip06-lpc";
>> +        #address-cells = <2>;
>> +        #size-cells = <1>;
>> +        reg = <0xa01b0000 0x1000>;
>> +
>> +        ipmi0: bt@e4 {
>> +            compatible = "ipmi-bt";
>> +            device_type = "ipmi";
>> +            reg = <0x01 0xe4 0x04>;
>> +        };
>> +    };
>> +...
>> \ No newline at end of file
> 
> 
> 
> .
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux