The new DMA architecture introduced with AM64 introduced new event types:
unampped events.
These events are mapped within INTA in contrast to other K3 devices where
the events with similar function was originating from the UDMAP or ringacc.
The ti,unmapped-event-sources should contain phandle array to the devices
in the system (typically DMA controllers) from where the unmapped events
originate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
.../bindings/interrupt-controller/ti,sci-inta.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index c7cd05656a3e..2837b90bbb56 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -70,6 +70,11 @@ properties:
- description: |
"limit" specifies the limit for translation
+ ti,unmapped-event-sources:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description:
+ Array of phandles to DMA controllers where the unmapped events originate.
+
required:
- compatible
- reg
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
