[PATCH v5 11/20] arm: dts: sunxi: h3/h5: Add DAI node and soundcard for HDMI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marcus Cooper <codekipper@xxxxxxxxx>

Add the new DAI block for I2S2 which is used for HDMI audio and
a simple-soundcard to link audio between HDMI and I2S.

Note that the HDMI codec requires an inverted frame clock and
a fixed I2S width. As there is no such option for I2S we use
TDM property of the simple-soundcard to do that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 33 ++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 22d533d18992..7168e9412410 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -105,6 +105,25 @@ de: display-engine {
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "sun8i-h3-hdmi";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,frame-inversion;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -662,6 +681,19 @@ i2s1: i2s@1c22400 {
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>, <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
@@ -793,6 +825,7 @@ csi: camera@1cb0000 {
 		};
 
 		hdmi: hdmi@1ee0000 {
+			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux