The PMIC's interrupt is level low and should be pulled up. The PMIC's
device node had pinctrl-0 property but it lacked pinctrl-names which
is required to apply the pin configuration. The actual problem in DTS
was pointed out by Felix Radensky from Variscite.
Reported-by: Felix Radensky <felix.r@xxxxxxxxxxxxx>
Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index a2d0190921e4..7f356edf9f91 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -116,13 +116,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
- /*
- * The interrupt is not correct. It should be level low,
- * however with internal pull up this causes IRQ storm.
- */
- interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
@@ -388,7 +385,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101
+ MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};
--
2.17.1
