The hardware is described in detail on Kobol's wiki at https://wiki.kobol.io/helios64/intro/. Up to now the following peripherals are working: - UART - Micro-SD card - eMMC - ethernet port 1 - status LED Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3399-kobol-helios64.dts | 339 ++++++++++++++++++ 2 files changed, 340 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index b87b1f773083..ddf07c5e5f7c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts new file mode 100644 index 000000000000..a41aa18f644e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Kobol Helios64"; + compatible = "kobol,helios64", "rockchip,rk3399"; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc12v_dcin_bkup: vcc12v-dcin-bkup { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin_bkup"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc1v8_sys_s0: vcc1v8-sys-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_sys_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc1v8_sys_s3>; + }; + + avdd_1v8_s0: avdd-1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "avdd_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0_sd"; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vcc3v3_sys_s3>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin_bkup>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + gpio-leds { + status = "okay"; + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&system_led>; + + status-led { + label = "helios64::status"; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "on"; + mode = <0x23>; + }; + + fault-led { + label = "helios64:red:fault"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic"; + default-state = "keep"; + mode = <0x23>; + }; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &rgmii_phy_reset>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x20>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys_s3>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys_s3>; + vddio-supply = <&vcc3v0_s3>; + + regulators { + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_sys_s3: DCDC_REG4 { + regulator-name = "vcc1v8_sys_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio_s0: LDO_REG4 { + regulator-name = "vcc_sdio_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v0_s3: LDO_REG8 { + regulator-name = "vcc3v0_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcc1v8_sys_s0>; + audio-supply = <&vcc1v8_sys_s0>; + sdmmc-supply = <&vcc_sdio_s0>; + gpio1830-supply = <&vcc3v0_s3>; +}; + +&pinctrl { + gmac { + rgmii_phy_reset: rgmii-phy-reset { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + leds { + system_led: sys-led { + rockchip,pins = + <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>, + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc3v0_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + supports-emmc; + non-removable; + disable-wp; + vqmmc-supply = <&vcc1v8_sys_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio_s0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; -- 2.28.0
