Re-add into the mail loop list. ChiYuan Huang <u0084500@xxxxxxxxx> 於 2020年9月25日 週五 下午12:09寫道： > > Mark Brown <broonie@xxxxxxxxxx> 於 2020年9月25日 週五 上午12:24寫道： > > > > On Thu, Sep 24, 2020 at 11:04:51PM +0800, cy_huang wrote: > > > > > + enable-gpio: > > > + description: A connection of the 'enable' gpio line. > > > + maxItems: 1 > > > > -gpios. GPIO properties should always be plural even if there's only > > one GPIO. > > > > > + ld_pulse_delay: > > > > Properties should use - not _ and for all the properties specifying > > things like times you should have units so... > > > > > + description: | > > > + load current pulse delay in microsecond after strobe pin pulse high. > > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > > > ...add -us here. > > > Ack > > > + fsin_enable: > > > + description: Fsin function enable control. > > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > > + minimum: 0 > > > + maximum: 1 > > > + default: 0 > > > > This looks like it should be a boolean property not a number. The same > > is true for most if not all of the other properties with min/max of 0/1. > Ok, just change the property as boolean type.
