Hi Maxime,
Some comments below, this driver needs to be changed:
On 18/09/2020 16:24, Maxime Chevallier wrote:
> The Techwell video decoder supports PAL, NTSC and SECAM input formats,
> and outputs a BT.656 signal.
>
> This commit adds support for this device, based on an implementation
> made by Rockchip. This implemention adds basic support for NTSC and PAL,
> and some basic brightness and contrast controls.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 9 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/tw9900.c | 671 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 681 insertions(+)
> create mode 100644 drivers/media/i2c/tw9900.c
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index c7ba76fee599..9b9f97fa4335 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -426,6 +426,15 @@ config VIDEO_TW2804
> To compile this driver as a module, choose M here: the
> module will be called tw2804.
>
> +config VIDEO_TW9900
> + tristate "Techwell TW9900 video decoder"
> + depends on VIDEO_V4L2 && I2C
> + help
> + Support for the Techwell tw9900 multi-standard video decoder
> +
> + To compile this driver as a module, choose M here: the
> + module will be called tw9900.
> +
> config VIDEO_TW9903
> tristate "Techwell TW9903 video decoder"
> depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index f0a77473979d..cbc1d9aedd38 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
> obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
> obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
> obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
> +obj-$(CONFIG_VIDEO_TW9900) += tw9900.o
> obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
> obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
> obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
> diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c
> new file mode 100644
> index 000000000000..950a7bbda80d
> --- /dev/null
> +++ b/drivers/media/i2c/tw9900.c
> @@ -0,0 +1,671 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Techwell TW9900 multi-standard video decoder.
> + *
> + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sysfs.h>
> +#include <linux/timer.h>
> +#include <linux/delay.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define TW9900_REG_CHIP_ID 0x00
> +#define TW9900_REG_CHIP_STATUS 0x01
> +#define TW9900_REG_CHIP_STATUS_VLOCK 0x08
> +#define TW9900_REG_CHIP_STATUS_VDLOSS 0x80
> +#define TW9900_REG_OUT_FMT_CTL 0x03
> +#define TW9900_REG_CKHY_HSDLY 0x04
> +#define TW9900_REG_OUT_CTRL_I 0x05
> +#define TW9900_REG_ANALOG_CTL 0x06
> +#define TW9900_REG_CROP_HI 0x07
> +#define TW9900_REG_VDELAY_LO 0x08
> +#define TW9900_REG_VACTIVE_LO 0x09
> +#define TW9900_REG_HACTIVE_LO 0x0B
> +#define TW9900_REG_CNTRL1 0x0C
> +#define TW9900_REG_BRIGHT_CTL 0x10
> +#define TW9900_REG_CONTRAST_CTL 0x11
> +#define TW9900_REG_VBI_CNTL 0x19
> +#define TW9900_REG_ANAL_CTL_II 0x1A
> +#define TW9900_REG_OUT_CTRL_II 0x1B
> +#define TW9900_REG_STD_SEL 0x1C
> +#define TW9900_REG_MISSCNT 0x26
> +#define TW9900_REG_MISC_CTL_II 0x2F
> +#define TW9900_REG_VVBI 0x55
> +
> +#define TW9900_CHIP_ID 0x00
> +
> +#define REG_SC_CTRL_MODE TW9900_REG_OUT_FMT_CTL
> +#define SC_CTRL_MODE_STANDBY 0xA7
> +#define SC_CTRL_MODE_STREAMING 0xA0
> +
> +#define REG_NULL 0xFF
> +
> +#define VSYNC_POLL_INTERVAL_MS 20
> +#define VSYNC_WAIT_MAX_POLLS 50
> +
> +static const char * const tw9900_supply_names[] = {
> + "vdd",
> +};
> +
> +#define TW9900_NUM_SUPPLIES ARRAY_SIZE(tw9900_supply_names)
> +
> +struct regval {
> + u8 addr;
> + u8 val;
> +};
> +
> +struct tw9900_mode {
> + u32 width;
> + u32 height;
> + u32 skip_top;
> + u32 std;
> + u32 field;
> + const struct regval *reg_list;
> +};
> +
> +struct tw9900 {
> + struct i2c_client *client;
> + struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data supplies[TW9900_NUM_SUPPLIES];
> +
> + bool streaming;
> +
> + struct v4l2_subdev subdev;
> + struct v4l2_ctrl_handler hdl;
> + struct media_pad pad;
> +
> + struct timer_list timer;
> + struct work_struct work_i2c_poll;
> +
> + const struct tw9900_mode *cur_mode;
> +};
> +
> +#define to_tw9900(sd) container_of(sd, struct tw9900, subdev)
> +
> +static const struct regval tw9900_init_regs[] = {
> + {TW9900_REG_MISC_CTL_II, 0xE6},
> + {TW9900_REG_MISSCNT, 0x24},
> + {TW9900_REG_OUT_FMT_CTL, 0xA7},
> + {TW9900_REG_ANAL_CTL_II, 0x0A},
> + {TW9900_REG_VDELAY_LO, 0x19},
> + {TW9900_REG_STD_SEL, 0x00},
> + {TW9900_REG_VACTIVE_LO, 0xF0},
> + {TW9900_REG_STD_SEL, 0x07},
> + {TW9900_REG_CKHY_HSDLY, 0x40},
> + {TW9900_REG_ANALOG_CTL, 0x80},
> + {TW9900_REG_CNTRL1, 0xdc},
> + {TW9900_REG_OUT_CTRL_I, 0x98},
> + {REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_yuv_regs[] = {
> + {REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_pal_regs[] = {
> + {TW9900_REG_STD_SEL, 0x01},
> + {REG_NULL, 0x0},
> +};
> +
> +static const struct regval tw9900_ntsc_regs[] = {
> + {TW9900_REG_OUT_FMT_CTL, 0xA4},
> + {TW9900_REG_VDELAY_LO, 0x12},
> + {TW9900_REG_VACTIVE_LO, 0xf0},
> + {TW9900_REG_CROP_HI, 0x02},
> + {TW9900_REG_HACTIVE_LO, 0xD0},
> + {TW9900_REG_VBI_CNTL, 0x01},
> + {TW9900_REG_STD_SEL, 0x00},
> + {REG_NULL, 0x0},
> +};
> +
> +static const struct tw9900_mode supported_modes[] = {
> + {
> + .width = 720,
> + .height = 576,
> + .skip_top = 0,
> + .std = V4L2_STD_PAL,
> + .field = V4L2_FIELD_NONE,
> + .reg_list = tw9900_pal_regs,
> + },
> + {
> + .width = 720,
> + .height = 480,
> + .skip_top = 0,
> + .std = V4L2_STD_NTSC,
> + .field = V4L2_FIELD_NONE,
> + .reg_list = tw9900_ntsc_regs,
> + },
> +};
> +
> +static int tw9900_write_reg(struct i2c_client *client, u8 reg, u8 val)
> +{
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(client, reg, val);
> +
> + if (ret < 0)
> + dev_err(&client->dev, "write reg error: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int tw9900_write_array(struct i2c_client *client,
> + const struct regval *regs)
> +{
> + int i, ret = 0;
> +
> + for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
> + ret = tw9900_write_reg(client, regs[i].addr, regs[i].val);
> +
> + return ret;
> +}
> +
> +static inline u8 tw9900_read_reg(struct i2c_client *client, u8 reg)
> +{
> + return i2c_smbus_read_byte_data(client, reg);
> +}
> +
> +static void tw9900_fill_fmt(const struct tw9900_mode *mode,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
> + fmt->width = mode->width;
> + fmt->height = mode->height;
> + fmt->field = mode->field;
> + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
> +}
> +
> +static int tw9900_find_closest_mode_index(u32 width, u32 height)
> +{
> + int i, best_score = 0, score, best = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
> + score = abs(supported_modes[i].width - width) +
> + abs(supported_modes[i].height - height);
> +
> + if (best_score > score) {
> + best_score = score;
> + best = i;
> + }
> + }
> +
> + return best;
> +}
> +
> +static int tw9900_find_mode_index(u32 width, u32 height)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(supported_modes); i++)
> + if (supported_modes[i].width == width &&
> + supported_modes[i].height == height)
> + return i;
> +
> + /* No match, find the closestmatch */
> + return tw9900_find_closest_mode_index(width, height);
> +}
> +
> +static int tw9900_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct tw9900 *tw9900 = to_tw9900(sd);
> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> + int mode_index = tw9900_find_mode_index(mbus_fmt->width,
> + mbus_fmt->height);
> +
> + if (mode_index < 0)
> + return -EINVAL;
> +
> + tw9900->cur_mode = &supported_modes[mode_index];
> +
> + tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
> +
> + /* Update the dimensions in case we don't have a perfect match */
> + mbus_fmt->width = tw9900->cur_mode->width;
> + mbus_fmt->height = tw9900->cur_mode->height;
> +
> + return 0;
> +}
> +
> +static int tw9900_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct tw9900 *tw9900 = to_tw9900(sd);
> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> +
> + tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
> +
> + return 0;
> +}
> +
> +static int tw9900_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index >= ARRAY_SIZE(supported_modes))
> + return -EINVAL;
> +
> + code->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> + return 0;
> +}
> +
> +static int tw9900_enum_frame_sizes(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + u32 index = fse->index;
> +
> + if (index >= ARRAY_SIZE(supported_modes))
> + return -EINVAL;
> +
> + fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> + fse->min_width = supported_modes[index].width;
> + fse->max_width = supported_modes[index].width;
> + fse->max_height = supported_modes[index].height;
> + fse->min_height = supported_modes[index].height;
> +
> + return 0;
> +}
> +
> +static int tw9900_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
> +{
> + struct tw9900 *tw9900 = to_tw9900(sd);
> +
> + *lines = tw9900->cur_mode->skip_top;
> +
> + return 0;
> +}
> +
> +static int __tw9900_power_on(struct tw9900 *tw9900)
> +{
> + int ret;
> + struct device *dev = &tw9900->client->dev;
> +
> + if (tw9900->reset_gpio)
> + gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
> +
> + ret = regulator_bulk_enable(TW9900_NUM_SUPPLIES, tw9900->supplies);
> + if (ret < 0)
> + goto error;
> +
> + usleep_range(50000, 52000);
> +
> + if (tw9900->reset_gpio)
> + gpiod_set_value_cansleep(tw9900->reset_gpio, 0);
> +
> + usleep_range(1000, 2000);
> +
> + ret = tw9900_write_array(tw9900->client, tw9900_init_regs);
> + if (ret) {
> + dev_err(dev, "Failed to init tw9900\n");
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> +
> + return ret;
> +}
> +
> +static void __tw9900_power_off(struct tw9900 *tw9900)
> +{
> + if (tw9900->reset_gpio)
> + gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
> +
> + regulator_bulk_disable(TW9900_NUM_SUPPLIES, tw9900->supplies);
> +}
> +
> +static int tw9900_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct tw9900 *tw9900 = container_of(ctrl->handler, struct tw9900, hdl);
> +
> + if (pm_runtime_suspended(&tw9900->client->dev))
> + return 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_BRIGHTNESS:
> + tw9900_write_reg(tw9900->client, 0x10, (u8)ctrl->val);
> + break;
> + case V4L2_CID_CONTRAST:
> + tw9900_write_reg(tw9900->client, 0x11, (u8)ctrl->val);
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int tw9900_s_stream(struct v4l2_subdev *sd, int on)
> +{
> + struct tw9900 *tw9900 = to_tw9900(sd);
> + struct i2c_client *client = tw9900->client;
> + int i, ret = 0;
> +
> + on = !!on;
> + if (on == tw9900->streaming)
> + goto unlock_and_return;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(&tw9900->client->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&client->dev);
> + goto unlock_and_return;
> + }
> +
> + ret = v4l2_ctrl_handler_setup(sd->ctrl_handler);
> + if (ret) {
> + pm_runtime_put(&client->dev);
> + goto unlock_and_return;
> + }
> +
> + ret = tw9900_write_array(tw9900->client,
> + tw9900->cur_mode->reg_list);
> + if (ret) {
> + pm_runtime_put(&client->dev);
> + goto unlock_and_return;
> + }
> +
> + /* Wait for VSync lock */
> + for (i = 0; i < VSYNC_WAIT_MAX_POLLS; i++) {
> + u8 status = tw9900_read_reg(tw9900->client,
> + TW9900_REG_CHIP_STATUS);
> + if (!(status & TW9900_REG_CHIP_STATUS_VDLOSS) &&
> + (status & TW9900_REG_CHIP_STATUS_VLOCK))
> + break;
> +
> + msleep(VSYNC_POLL_INTERVAL_MS);
> + }
> +
> + ret = tw9900_write_reg(client, REG_SC_CTRL_MODE,
> + SC_CTRL_MODE_STREAMING);
> + if (ret) {
> + pm_runtime_put(&client->dev);
> + goto unlock_and_return;
> + }
> +
> + } else {
> + tw9900_write_reg(client, REG_SC_CTRL_MODE,
> + SC_CTRL_MODE_STANDBY);
> + pm_runtime_put(&client->dev);
> + }
> +
> + tw9900->streaming = on;
> +
> +unlock_and_return:
> +
> + return ret;
> +}
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static int tw9900_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct tw9900 *tw9900 = to_tw9900(sd);
> + struct v4l2_mbus_framefmt *try_fmt;
> +
> + try_fmt = v4l2_subdev_get_try_format(sd, fh->pad, 0);
> +
> + /* Initialize try_fmt */
> + tw9900_fill_fmt(tw9900->cur_mode, try_fmt);
> +
> + return 0;
> +}
> +#endif
> +
> +static int tw9900_runtime_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct tw9900 *tw9900 = to_tw9900(sd);
> +
> + return __tw9900_power_on(tw9900);
> +}
> +
> +static int tw9900_runtime_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct tw9900 *tw9900 = to_tw9900(sd);
> +
> + __tw9900_power_off(tw9900);
> +
> + return 0;
> +}
> +
> +static int tw9900_subscribe_event(struct v4l2_subdev *sd,
> + struct v4l2_fh *fh,
> + struct v4l2_event_subscription *sub)
> +{
> + switch (sub->type) {
> + case V4L2_EVENT_SOURCE_CHANGE:
> + return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
> + case V4L2_EVENT_CTRL:
> + return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct dev_pm_ops tw9900_pm_ops = {
> + SET_RUNTIME_PM_OPS(tw9900_runtime_suspend,
> + tw9900_runtime_resume, NULL)
> +};
> +
> +static const struct v4l2_subdev_core_ops tw9900_core_ops = {
> + .subscribe_event = tw9900_subscribe_event,
> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_video_ops tw9900_video_ops = {
> + .s_stream = tw9900_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops tw9900_pad_ops = {
> + .enum_mbus_code = tw9900_enum_mbus_code,
> + .enum_frame_size = tw9900_enum_frame_sizes,
> + .get_fmt = tw9900_get_fmt,
> + .set_fmt = tw9900_set_fmt,
> +};
> +
> +static struct v4l2_subdev_sensor_ops tw9900_sensor_ops = {
> + .g_skip_top_lines = tw9900_g_skip_top_lines,
> +};
> +
> +static const struct v4l2_subdev_ops tw9900_subdev_ops = {
> + .core = &tw9900_core_ops,
> + .video = &tw9900_video_ops,
> + .pad = &tw9900_pad_ops,
> + .sensor = &tw9900_sensor_ops,
> +};
This is wrong. This is not a sensor, so you don't set the format, instead
you set the TV standard (s_std).
drivers/media/i2c/tw9910.c is a fairly OK template to use. The tw9910 supports
a simple scaler as well, but I don't know if the tw9900 has the same feature.
If not, then the format resolution is fixed based on the current selected
TV standard.
There is definitely no need for g_skip_top_lines: 1) it's a sensor-only op,
and 2) that function always returns 0, so why keep it?
> +
> +static const struct v4l2_ctrl_ops tw9900_ctrl_ops = {
> + .s_ctrl = tw9900_s_ctrl,
> +};
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static const struct v4l2_subdev_internal_ops tw9900_internal_ops = {
> + .open = tw9900_open,
> +};
> +#endif
> +
> +static int tw9900_check_sensor_id(struct tw9900 *tw9900,
*Not* a sensor :-)
> + struct i2c_client *client)
> +{
> + struct device *dev = &tw9900->client->dev;
> + u8 id;
> +
> + id = tw9900_read_reg(client, TW9900_CHIP_ID);
> +
> + if (id != TW9900_CHIP_ID) {
> + dev_err(dev, "Wrong camera sensor id(%04x)\n", id);
> + return -EINVAL;
> + }
> +
> + dev_info(dev, "Detected TW9900 (%04x) sensor\n", TW9900_CHIP_ID);
> +
> + return 0;
> +}
> +
> +static int tw9900_configure_regulators(struct tw9900 *tw9900)
> +{
> + u32 i;
> +
> + for (i = 0; i < TW9900_NUM_SUPPLIES; i++)
> + tw9900->supplies[i].supply = tw9900_supply_names[i];
> +
> + return devm_regulator_bulk_get(&tw9900->client->dev,
> + TW9900_NUM_SUPPLIES,
> + tw9900->supplies);
> +}
> +
> +static int tw9900_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct v4l2_ctrl_handler *hdl;
> + struct tw9900 *tw9900;
> + int ret;
> +
> + tw9900 = devm_kzalloc(dev, sizeof(*tw9900), GFP_KERNEL);
> + if (!tw9900)
> + return -ENOMEM;
> +
> + tw9900->client = client;
> + tw9900->cur_mode = &supported_modes[0];
> +
> + tw9900->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(tw9900->reset_gpio))
> + tw9900->reset_gpio = NULL;
> +
> + ret = tw9900_configure_regulators(tw9900);
> + if (ret) {
> + dev_err(dev, "Failed to get power regulators\n");
> + return ret;
> + }
> +
> + v4l2_i2c_subdev_init(&tw9900->subdev, client, &tw9900_subdev_ops);
> + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> +
> + hdl = &tw9900->hdl;
> +
> + v4l2_ctrl_handler_init(hdl, 2);
> +
> + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_BRIGHTNESS,
> + -128, 127, 1, 0);
> + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_CONTRAST,
> + 0, 255, 1, 0x60);
> +
> + tw9900->subdev.ctrl_handler = hdl;
> + if (hdl->error) {
> + int err = hdl->error;
> +
> + v4l2_ctrl_handler_free(hdl);
> + return err;
> + }
> +
> + ret = __tw9900_power_on(tw9900);
> + if (ret)
> + return ret;
> +
> + ret = tw9900_check_sensor_id(tw9900, client);
> + if (ret)
> + goto err_power_off;
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> + tw9900->subdev.internal_ops = &tw9900_internal_ops;
> + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +#endif
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + tw9900->pad.flags = MEDIA_PAD_FL_SOURCE;
> + tw9900->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
Set to MEDIA_ENT_F_ATV_DECODER.
Regards,
Hans
> +
> + ret = media_entity_pads_init(&tw9900->subdev.entity, 1, &tw9900->pad);
> + if (ret < 0)
> + goto err_power_off;
> +#endif
> +
> + ret = v4l2_async_register_subdev(&tw9900->subdev);
> + if (ret) {
> + dev_err(dev, "v4l2 async register subdev failed\n");
> + goto err_clean_entity;
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + pm_runtime_idle(dev);
> +
> + return 0;
> +
> +err_clean_entity:
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + media_entity_cleanup(&tw9900->subdev.entity);
> +#endif
> +err_power_off:
> + __tw9900_power_off(tw9900);
> +
> + return ret;
> +}
> +
> +static int tw9900_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct tw9900 *tw9900 = to_tw9900(sd);
> +
> + v4l2_async_unregister_subdev(sd);
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + media_entity_cleanup(&sd->entity);
> +#endif
> +
> + pm_runtime_disable(&client->dev);
> + if (!pm_runtime_status_suspended(&client->dev))
> + __tw9900_power_off(tw9900);
> + pm_runtime_set_suspended(&client->dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id tw9900_id[] = {
> + {"tw9900", 0},
> + {},
> +};
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id tw9900_of_match[] = {
> + { .compatible = "techwell,tw9900" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, tw9900_of_match);
> +#endif
> +
> +static struct i2c_driver tw9900_i2c_driver = {
> + .driver = {
> + .name = "tw9900",
> + .pm = &tw9900_pm_ops,
> + .of_match_table = tw9900_of_match
> + },
> + .probe = tw9900_probe,
> + .remove = tw9900_remove,
> + .id_table = tw9900_id,
> +};
> +
> +module_i2c_driver(tw9900_i2c_driver);
> +
> +MODULE_DESCRIPTION("tw9900 sensor driver");
> +MODULE_LICENSE("GPL v2");
>
