Re: [PATCH v7 2/2] dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Viresh & Rob Sir:

I will change frequency domain to below and define it in cpufreq_hw
schema rather than cpu node.

mediatek,freq-domain-0 = <&cpu0>, <&cpu1>;

Is it OK to you?
Or you think OPP define is a better solution?

opp-table-0 {
    compatible = "mediatek,hw-operating-points", "operating-points-v2";
};

Thank you for the opinions.



On Wed, 2020-09-23 at 21:10 +0800, Hector Yuan wrote:
> On Tue, 2020-09-22 at 14:28 -0600, Rob Herring wrote:
> > On Thu, Sep 10, 2020 at 12:31:02PM +0800, Hector Yuan wrote:
> > > From: "Hector.Yuan" <hector.yuan@xxxxxxxxxxxx>
> > > 
> > > Add devicetree bindings for MediaTek HW driver.
> > > 
> > > Signed-off-by: Hector.Yuan <hector.yuan@xxxxxxxxxxxx>
> > > ---
> > >  .../bindings/cpufreq/cpufreq-mediatek-hw.yaml      |  141 ++++++++++++++++++++
> > >  1 file changed, 141 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > > new file mode 100644
> > > index 0000000..118a163
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > > @@ -0,0 +1,141 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MediaTek's CPUFREQ Bindings
> > > +
> > > +maintainers:
> > > +  - Hector Yuan <hector.yuan@xxxxxxxxxxxx>
> > > +
> > > +description:
> > > +  CPUFREQ HW is a hardware engine used by MediaTek
> > > +  SoCs to manage frequency in hardware. It is capable of controlling frequency
> > > +  for multiple clusters.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: "mediatek,cpufreq-hw"
> > 
> > Needs to be SoC specific. This stuff is never constant from one SoC to 
> > the next. 'cpufreq' is a Linuxism. What's the block called in the 
> > datasheet? Use that.
> > 
> OK, will use mediatek,sspm-dvfs-mt6779 instead.
> > Don't need quotes either.
> > 
> OK, will remove it.
> > > +
> > > +  reg:
> > > +    minItems: 1
> > > +    maxItems: 2
> > > +    description: |
> > > +      Addresses and sizes for the memory of the HW bases in each frequency domain.
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: "freq-domain0"
> > > +      - const: "freq-domain1"
> > 
> > Kind of pointless to have names based on the index. Drop 'reg-names'.
> > 
> OK, will drop it.
> > > +    description: |
> > > +      Frequency domain name. i.e.
> > > +      "freq-domain0", "freq-domain1".
> > > +
> > > +  "#freq-domain-cells":
> > > +    const: 1
> > > +    description: |
> > > +      Number of cells in a freqency domain specifier.
> > 
> > You don't need this. It's not a common binding that's going to vary.
> > 
> OK, will remove it.
> > > +
> > > +  mtk-freq-domain:
> > > +    maxItems: 1
> > > +    description: |
> > > +      Define this cpu belongs to which frequency domain. i.e.
> > > +      cpu0-3 belong to frequency domain0,
> > > +      cpu4-6 belong to frequency domain1.
> > 
> > This property doesn't go in the 'mediatek,cpufreq-hw' node. You would 
> > need a separate schema. However, I think the easiest thing to do here is 
> > something like this:
> > 
> > mediatek,freq-domain-0 = <&cpu0>, <&cpu1>;
> > 
> Sorry, may I know the reason and the details about how to separate
> schema? Thank you very much.
> 
> The numbers of frequency domain may be vary from different projects. If
> I do the easier way, I may need to implement extra loop to check how
> many frequency domain.
> > Or you could just re-use the OPP binding with just 0 entries:
> > 
> > opp-table-0 {
> >   compatible = "mediatek,hw-operating-points", "operating-points-v2";
> > };
> > opp-table-1 {
> >   compatible = "mediatek,hw-operating-points", "operating-points-v2";
> > };
> > 
> In previous review stage, already abandon OPP framework in driver code.
> Will check with Viresh to see if its OK to add OPP back.
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reg-names
> > > +  - "#freq-domain-cells"
> > > +
> > > +examples:
> > > +  - |
> > > +    cpus {
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +
> > > +            cpu0: cpu@0 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 0>;
> > > +                reg = <0x000>;
> > > +            };
> > > +
> > > +            cpu1: cpu@1 {
> > 
> > Unit address is wrong.
> > 
> OK, will modify to "cpu1 : cpu@100" if we still decide to put
> freq_domain in CPU node.
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 0>;
> > > +                reg = <0x100>;
> > > +            };
> > > +
> > > +            cpu2: cpu@2 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 0>;
> > > +                reg = <0x200>;
> > > +            };
> > > +
> > > +            cpu3: cpu@3 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 0>;
> > > +                reg = <0x300>;
> > > +            };
> > > +
> > > +            cpu4: cpu@4 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 1>;
> > > +                reg = <0x400>;
> > > +            };
> > > +
> > > +            cpu5: cpu@5 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a55";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 1>;
> > > +                reg = <0x500>;
> > > +            };
> > > +
> > > +            cpu6: cpu@6 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a75";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 1>;
> > > +                reg = <0x600>;
> > > +            };
> > > +
> > > +            cpu7: cpu@7 {
> > > +                device_type = "cpu";
> > > +                compatible = "arm,cortex-a75";
> > > +                enable-method = "psci";
> > > +                mtk-freq-domain = <&cpufreq_hw 1>;
> > > +                reg = <0x700>;
> > > +            };
> > > +    };
> > > +
> > > +    /* ... */
> > > +
> > > +    soc {
> > > +        #address-cells = <2>;
> > > +        #size-cells = <2>;
> > > +
> > > +        cpufreq_hw: cpufreq@11bc00 {
> > > +            compatible = "mediatek,cpufreq-hw";
> > > +            reg = <0 0x11bc10 0 0x8c>,
> > > +               <0 0x11bca0 0 0x8c>;
> > > +            reg-names = "freq-domain0", "freq-domain1";
> > > +            #freq-domain-cells = <1>;
> > > +        };
> > > +    };
> > > +
> > > +
> > > +
> > > +
> > > -- 
> > > 1.7.9.5
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux