Re: [PATCH v1 1/6] dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi dee Ho peeps!

On Thu, 2020-09-24 at 09:12 +0300, Matti Vaittinen wrote:
> On Wed, 2020-09-23 at 08:27 -0600, Rob Herring wrote:
> > On Sat, Sep 19, 2020 at 5:46 AM Vaittinen, Matti
> > <Matti.Vaittinen@xxxxxxxxxxxxxxxxx> wrote:
> > > Thanks Rob for taking a look at this!
> > > 
> > > On Fri, 2020-09-18 at 11:28 -0600, Rob Herring wrote:
> > > > On Thu, Sep 17, 2020 at 11:01:52AM +0300, Matti Vaittinen
> > > > wrote:
> > > > > Add bindings for ROHM BD9576MUF and BD9573MUF PMICs. These
> > > > > PMICs are primarily intended to be used to power the R-Car
> > > > > series
> > > > > processors. They provide 6 power outputs, safety features and
> > > > > a
> > > > > watchdog with two functional modes.
> > > > > 
> > > > > Signed-off-by: Matti Vaittinen <
> > > > > matti.vaittinen@xxxxxxxxxxxxxxxxx>
> > > > > ---
> > > > >  .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129
> > > > > ++++++++++++++++++
> > > > >  1 file changed, 129 insertions(+)
> > > > >  create mode 100644
> > > > > Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml

// Snip

> > > > > +
> > > > > +  hw_margin_ms:
> > > > 
> > > > Needs a vendor prefix.
> > > > 
> > > > s/_/-/
> > > > 
> > > > > +    minimum: 4
> > > > > +    maximum: 4416
> > > > > +    description: Watchog timeout in milliseconds
> > > > 
> > > > Maybe the words in the description should be in the property
> > > > name
> > > > as
> > > > I don't see how 'h/w margin' relates to 'watchdog timeout'.
> > > 
> > > The hw_margin_ms is an existing property. As I wrote to Guenter:
> > > "hw_margin_ms" is an existing binding for specifying the maximum
> > > TMO in
> > > HW (if I understood it correctly). (It is used at least by the
> > > generig
> > > GPIO watchdog) I thought it's better to not invent a new vendor
> > > specific binding when we have a generic one.
> > > 
> > > https://elixir.bootlin.com/linux/v5.9-rc2/source/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> > 
> > That one is odd and I haven't found an actual user of it. It would
> > make more sense as a collection of properties devices could use
> > rather
> > than a virtual device.
> > 
> > I think I'd do something like 'watchdog-ping-time-msec' that can be
> > either '<min> <max>' or '<max>'.
> 
> Your suggestion looks good to me. If we introduce such then it would
> make sense to add handling for this in GPIO watchdog too.
> 
> What I do wonder is how "hw_margin_ms" is unused? I see it is a
> required property for GPIO watchdog. The GPIO WDG probe seems to
> actually error out if reading this property fails with any error. I
> would assume the GPIO WDG is used somewhere? Hence I am a bit afraid
> of
> touching it. Breaking existing setups would not be nice.
> 
> Guenter - how do you see this? Should we leave GPIO WDG as it is,
> convert it to use this new binding Rob suggested - or support both
> the
> old and new (at least for some time) in the driver - and possibly
> print
> a warning when old is used?

And one thing more - I don't think the 'watchdog-ping-time-msec' is
best candidate as it sounds like the time when one should ping the WDG
(SW feature). We already have the timeout-sec defined for that. This
new property is to configure/advertice the HW time limit - Eg, time
when WDG takes action if it has not been pinged (for max) or takes
action if WDG is pinged too quickly (min). Thus I liked hw-margin
better than ping-time. (For example with hw-margin <500ms> ... <4000ms>
the ping-time 1000 ms would be just fine.

Couple of things I would like to get opinions for ... 

1. Corect location for this binding - and should it be vendor specific
or generic?
 - I wonder if I should put this new property in rohm-bd9576.yaml? 
 - Should it be vendor specific? 
 - Or should I put it in watchdog.yaml and make it generic?

I think it should be generic as many wdg chips implement the timeout
configuration.

2. Should we extend WDG core to parse this property if it is placed in
watchdog.yaml?
2a) And should we extend watchdog core to call the driver callback for
setting timeout if it finds the <max> tmo?
2b) Should we extend driver IF to allow callback for setting min tmo?
2c) Current tmo setting callback uses units of seconds. Should we
support setting TMO in ms? I think it might make sense for few specific
Linux setups. (I know people use Linux for things that are almost RT -
no matter how clever that is. So some might benefit from sub-second
scale wdg window).

Thoughts?

Best Regards
	Matti Vaittinen


--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~

Simon says - in Latin please.
"non cogito me" dixit Rene Descarte, deinde evanescavit

(Thanks for the translation Simon)





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux