Convert the Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
binding to DT schema format using json-schema.
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
.../interrupt-controller/snps,dw-apb-ictl.txt | 43 -------------
.../interrupt-controller/snps,dw-apb-ictl.yaml | 74 ++++++++++++++++++++++
2 files changed, 74 insertions(+), 43 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
deleted file mode 100644
index 2db59df9408f4c6..000000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
-
-Synopsys DesignWare provides interrupt controller IP for APB known as
-dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
-controller in some SoCs, e.g. Hisilicon SD5203.
-
-Required properties:
-- compatible: shall be "snps,dw-apb-ictl"
-- reg: physical base address of the controller and length of memory mapped
- region starting with ENABLE_LOW register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
-
-Additional required property when it's used as secondary interrupt controller:
-- interrupts: interrupt reference to primary interrupt controller
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of low interrupts,
-- 1 maps to bit 1 of low interrupts,
-- 32 maps to bit 0 of high interrupts,
-- 33 maps to bit 1 of high interrupts,
-- (optional) fast interrupts start at 64.
-
-Example:
- /* dw_apb_ictl is used as secondary interrupt controller */
- aic: interrupt-controller@3000 {
- compatible = "snps,dw-apb-ictl";
- reg = <0x3000 0xc00>;
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* dw_apb_ictl is used as primary interrupt controller */
- vic: interrupt-controller@10130000 {
- compatible = "snps,dw-apb-ictl";
- reg = <0x10130000 0x1000>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
new file mode 100644
index 000000000000000..1b05d36b5f7b943
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+maintainers:
+ - Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
+
+description: |
+ Synopsys DesignWare provides interrupt controller IP for APB known as
+ dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
+ with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
+ interrupt controller in some SoCs, e.g. Hisilicon SD5203.
+
+ The interrupt sources map to the corresponding bits in the interrupt
+ registers, i.e.
+ - 0 maps to bit 0 of low interrupts,
+ - 1 maps to bit 1 of low interrupts,
+ - 32 maps to bit 0 of high interrupts,
+ - 33 maps to bit 1 of high interrupts,
+ - (optional) fast interrupts start at 64.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: snps,dw-apb-ictl
+
+ interrupt-controller: true
+
+ reg:
+ description: |
+ Physical base address of the controller and length of memory mapped
+ region starting with ENABLE_LOW register.
+ maxItems: 1
+
+ interrupts:
+ description: Interrupt reference to primary interrupt controller.
+ maxItems: 1
+
+ "#interrupt-cells":
+ description: Number of cells to encode an interrupt-specifier.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+examples:
+ - |
+ /* dw_apb_ictl is used as secondary interrupt controller */
+ aic: interrupt-controller@3000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3000 0xc00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 3 4>;
+ };
+
+ /* dw_apb_ictl is used as primary interrupt controller */
+ vic: interrupt-controller@10130000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x10130000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+...
--
1.8.3
