On Sat, Sep 19, 2020 at 11:45:18PM +0200, Adrian Schmutzler wrote: > > -----Original Message----- > > From: Adrian Schmutzler [mailto:freifunk@xxxxxxxxxxxxxxxxxxx] > > Sent: Samstag, 19. September 2020 19:28 > > To: Rob Herring <robh+dt@xxxxxxxxxx>; Pavel Machek <pavel@xxxxxx>; Dan > > Murphy <dmurphy@xxxxxx>; Linus Walleij <linus.walleij@xxxxxxxxxx>; > > devicetree@xxxxxxxxxxxxxxx; Adrian Schmutzler > > <freifunk@xxxxxxxxxxxxxxxxxxx> > > Subject: [PATCH v2 1/2] dt-bindings: leds: add LED_FUNCTION for > > wlan2g/wlan5g > > > > Many consumer "routers" have dedicated LEDs for specific WiFi bands, e.g. > > one for 2.4 GHz and one for 5 GHz. These LEDs specifically indicate the state > > of the relevant band, so the latter should be included in the function name. > > LED_FUNCTION_WLAN will remain for general cases or when the LED is used > > for more than one band. > > > > This essentially is equivalent to how we use LED_FUNCTION_LAN and > > LED_FUNCTION_WAN instead of just having LED_FUNCTION_ETHERNET. > > I only just became aware of the linux-leds@xxxxxxxxxxxxxxx mailing list, and resubmitted there. It should both there and the DT list. > Sorry for the noise. Maybe get_maintainers.sh should be updated for this file. Patches welcome. Rob
