Re: [PATCH 2/3] dt-bindings: remoteproc: stm32_rproc: update for firmware synchronization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Gentle reminder.
As I'm not sure to well understand your comment I would appreciate if you could
confirm your expectation before I sent a v2.

Thanks in advance,
Arnaud 

On 9/11/20 3:49 PM, Arnaud POULIQUEN wrote:
> Hi Rob,
> 
> On 9/9/20 10:22 PM, Rob Herring wrote:
>> On Thu, Aug 27, 2020 at 09:21:00AM +0200, Arnaud Pouliquen wrote:
>>> Add new properties description used to attach to a pre-loaded
>>> firmware according to the commit 9276536f455b3
>>> ("remoteproc: stm32: Parse syscon that will manage M4 synchronisation")
>>> which updates the driver part.
>>>
>>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
>>> ---
>>>  .../bindings/remoteproc/st,stm32-rproc.yaml   | 19 +++++++++++++++++++
>>>  1 file changed, 19 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
>>> index 4ffa25268fcc..e50957d86b1c 100644
>>> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
>>> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
>>> @@ -96,6 +96,25 @@ properties:
>>>          3rd cell: register bitmask for the deep sleep bit
>>>      maxItems: 1
>>>  
>>> +  st,syscfg-m4-state:
>>> +    $ref: "/schemas/types.yaml#/definitions/phandle-array"
>>> +    description: |
>>> +      Reference to the tamp register which exposes the Cortex-M4 state.
>>> +        1st cell: phandle to syscon block
>>> +        2nd cell: register offset containing the Cortex-M4 state
>>> +        3rd cell: register bitmask for the Cortex-M4 state
>>> +    maxItems: 1
>>> +
>>> +  st,syscfg-rsc-tbl:
>>> +    $ref: "/schemas/types.yaml#/definitions/phandle-array"
>>> +    description: |
>>> +      Reference to the tamp register which references the Cortex-M4
>>> +      resource table address.
>>> +        1st cell: phandle to syscon block
>>> +        2nd cell: register offset containing the resource table address
>>> +        3rd cell: register bitmask for the resource table address
>>> +    maxItems: 1
>>
>> Why can't these be implied? You can lookup the tamp syscon by 
>> compatible.
> 
> I just made a copy/past of the  "st,syscfg-pdds" syscon description available in the same file [1]
>   
> I can provide a shorter descriptions, something like this:
> 
>    description: |
>      Reference to the tamp syscon register and bitmask which contains the Cortex-M4
>       resource table address.
>    maxItems: 1
> 
> Would this meet your expectations? If yes, I will also add in next version an extra patch to fix [1]
> 
> [1] https://elixir.bootlin.com/linux/v5.9-rc3/source/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml#L90
> 
>>
>> Please add these to the example.
> 
> I will extend the example with these properties
> 
> Thanks,
> Arnaud
> 
>>
>>> +
>>>    st,auto-boot:
>>>      $ref: /schemas/types.yaml#/definitions/flag
>>>      description:
>>> -- 
>>> 2.17.1
>>>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux