Re: [PATCH v3 14/15] ARM: dts: armada: align GPIO hog names with dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.


Applied on mvebu/dt

Thanks,

Gregory

>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/armada-388-clearfog.dts  |  4 ++--
>  arch/arm/boot/dts/armada-388-clearfog.dtsi | 10 +++++-----
>  arch/arm/boot/dts/armada-388-helios4.dts   |  6 +++---
>  3 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
> index 20f8d4667753..4140a5303b48 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dts
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dts
> @@ -73,13 +73,13 @@
>  	 * 14-SFP_TX_DISABLE
>  	 * 15-SFP_MOD_DEF0
>  	 */
> -	pcie2_0_clkreq {
> +	pcie2-0-clkreq-hog {
>  		gpio-hog;
>  		gpios = <4 GPIO_ACTIVE_LOW>;
>  		input;
>  		line-name = "pcie2.0-clkreq";
>  	};
> -	pcie2_0_w_disable {
> +	pcie2-0-w-disable-hog {
>  		gpio-hog;
>  		gpios = <7 GPIO_ACTIVE_LOW>;
>  		output-low;
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> index a0aa1d188f0c..f8a06ae4a3c9 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> @@ -141,31 +141,31 @@
>  		#gpio-cells = <2>;
>  		reg = <0x20>;
>  
> -		pcie1_0_clkreq {
> +		pcie1-0-clkreq-hog {
>  			gpio-hog;
>  			gpios = <0 GPIO_ACTIVE_LOW>;
>  			input;
>  			line-name = "pcie1.0-clkreq";
>  		};
> -		pcie1_0_w_disable {
> +		pcie1-0-w-disable-hog {
>  			gpio-hog;
>  			gpios = <3 GPIO_ACTIVE_LOW>;
>  			output-low;
>  			line-name = "pcie1.0-w-disable";
>  		};
> -		usb3_ilimit {
> +		usb3-ilimit-hog {
>  			gpio-hog;
>  			gpios = <5 GPIO_ACTIVE_LOW>;
>  			input;
>  			line-name = "usb3-current-limit";
>  		};
> -		usb3_power {
> +		usb3-power-hog {
>  			gpio-hog;
>  			gpios = <6 GPIO_ACTIVE_HIGH>;
>  			output-high;
>  			line-name = "usb3-power";
>  		};
> -		m2_devslp {
> +		m2-devslp-hog {
>  			gpio-hog;
>  			gpios = <11 GPIO_ACTIVE_HIGH>;
>  			output-low;
> diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
> index fb49df2a3bce..b3728de3bd3f 100644
> --- a/arch/arm/boot/dts/armada-388-helios4.dts
> +++ b/arch/arm/boot/dts/armada-388-helios4.dts
> @@ -166,19 +166,19 @@
>  					interrupt-controller;
>  					#interrupt-cells = <2>;
>  
> -					board_rev_bit_0 {
> +					board-rev-bit-0-hog {
>  						gpio-hog;
>  						gpios = <0 GPIO_ACTIVE_LOW>;
>  						input;
>  						line-name = "board-rev-0";
>  					};
> -					board_rev_bit_1 {
> +					board-rev-bit-1-hog {
>  						gpio-hog;
>  						gpios = <1 GPIO_ACTIVE_LOW>;
>  						input;
>  						line-name = "board-rev-1";
>  					};
> -					usb3_ilimit {
> +					usb3-ilimit-hog {
>  						gpio-hog;
>  						gpios = <5 GPIO_ACTIVE_HIGH>;
>  						input;
> -- 
> 2.17.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux