Convert sdhci-am654 documentation to yaml format. The new file
sdhci-am654.yaml will inherit from mmc-controller.yaml.
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
.../devicetree/bindings/mmc/sdhci-am654.txt | 65 -------
.../devicetree/bindings/mmc/sdhci-am654.yaml | 175 ++++++++++++++++++
2 files changed, 175 insertions(+), 65 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-am654.txt
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
deleted file mode 100644
index b49cbfdd679f..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs
-
-The bindings follow the mmc[1], clock[2] and interrupt[3] bindings.
-Only deviations are documented here.
-
- [1] Documentation/devicetree/bindings/mmc/mmc.txt
- [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
- [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Required Properties:
- - compatible: should be one of:
- "ti,am654-sdhci-5.1": SDHCI on AM654 device.
- "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
- "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
- "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
- "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
- - reg: Must be two entries.
- - The first should be the sdhci register space
- - The second should the subsystem/phy register space
- - clocks: Handles to the clock inputs.
- - clock-names: Tuple including "clk_xin" and "clk_ahb"
- - interrupts: Interrupt specifiers
- Output tap delay for each speed mode:
- - ti,otap-del-sel-legacy
- - ti,otap-del-sel-mmc-hs
- - ti,otap-del-sel-sd-hs
- - ti,otap-del-sel-sdr12
- - ti,otap-del-sel-sdr25
- - ti,otap-del-sel-sdr50
- - ti,otap-del-sel-sdr104
- - ti,otap-del-sel-ddr50
- - ti,otap-del-sel-ddr52
- - ti,otap-del-sel-hs200
- - ti,otap-del-sel-hs400
- These bindings must be provided otherwise the driver will disable the
- corresponding speed mode (i.e. all nodes must provide at least -legacy)
-
-Optional Properties (Required for ti,am654-sdhci-5.1,
- ti,j721e-sdhci-8bit,
- ti,j7200-sdhci-8bit):
- - ti,trm-icp: DLL trim select
- - ti,driver-strength-ohm: driver strength in ohms.
- Valid values are 33, 40, 50, 66 and 100 ohms.
-Optional Properties:
- - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0.
- - ti,clkbuf-sel: Clock Delay Buffer Select
-
-Example:
-
- sdhci0: sdhci@4f80000 {
- compatible = "ti,am654-sdhci-5.1";
- reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
- power-domains = <&k3_pds 47>;
- clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
- clock-names = "clk_ahb", "clk_xin";
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- sdhci-caps-mask = <0x80000007 0x0>;
- mmc-ddr-1_8v;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-ddr52 = <0x5>;
- ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
- };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 000000000000..c222e057eca9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#";
+$schema : "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: TI AM654 MMC Controller
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-sdhci-5.1
+ - ti,j721e-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+ - ti,j7200-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ description: Handles to input clocks
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: clk_ahb
+ - const: clk_xin
+
+ # PHY output tap delays:
+ # Used to delay the data valid window and align it to the sampling clock.
+ # Binding needs to be provided for each supported speed mode otherwise the
+ # corresponding mode will be disabled.
+
+ ti,otap-del-sel-legacy:
+ description: Output tap delay for SD/MMC legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-mmc-hs:
+ description: Output tap delay for MMC high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sd-hs:
+ description: Output tap delay for SD high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr12:
+ description: Output tap delay for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr25:
+ description: Output tap delay for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr50:
+ description: Output tap delay for SD UHS SDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr104:
+ description: Output tap delay for SD UHS SDR104 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr50:
+ description: Output tap delay for SD UHS DDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr52:
+ description: Output tap delay for eMMC DDR52 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs200:
+ description: Output tap delay for eMMC HS200 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs400:
+ description: Output tap delay for eMMC HS400 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,trm-icp:
+ description: DLL trim select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,driver-strength-ohm:
+ description: DLL drive strength in ohms
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ oneOf:
+ - enum:
+ - 33
+ - 40
+ - 50
+ - 66
+ - 100
+
+ ti,strobe-sel:
+ description: strobe select delay for HS400 speed mode.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ ti,clkbuf-sel:
+ description: Clock Delay Buffer Select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ti,otap-del-sel-legacy
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mmc0: mmc@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci-caps-mask = <0x80000007 0x0>;
+ mmc-ddr-1_8v;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x5>;
+ ti,otap-del-sel-hs400 = <0x0>;
+ ti,trm-icp = <0x8>;
+ };
+ };
--
2.17.1
