The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.
The first controller was tested on the Kontron sl28 board.
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 0efeb8fa773e..807ee921ec12 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -386,6 +386,24 @@
status = "disabled";
};
+ can0: can@2180000 {
+ compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@2190000 {
+ compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
--
2.20.1
