On Tue, Jun 10, 2014 at 10:04 AM, Feng Kan <fkan@xxxxxxx> wrote: > Add APM X-Gene SoC gpio controller driver. This version has become quite simpler than the previous ones, great! I was about to give my ack, but spotted one last issue in the dir_out function, so we will need to have another pass. But otherwise this looks good to me. > > Signed-off-by: Feng Kan <fkan@xxxxxxx> > --- > drivers/gpio/Kconfig | 9 ++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-xgene.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 246 insertions(+) > create mode 100644 drivers/gpio/gpio-xgene.c > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index a86c49a..9a15983 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -324,6 +324,15 @@ config GPIO_TZ1090_PDC > help > Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. > > +config GPIO_XGENE > + bool "APM X-Gene GPIO controller support" > + depends on ARM64 && OF_GPIO > + help > + This driver is to support the GPIO block within the APM X-Gene SoC > + platform's generic flash controller. The GPIO pins are muxed with > + the generic flash controller's address and data pins. Say yes > + here to enable the GFC GPIO functionality. > + > config GPIO_XILINX > bool "Xilinx GPIO support" > depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index 6309aff..f0f2830 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -98,6 +98,7 @@ obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o > obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o > obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o > obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o > +obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o > obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o > obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o > obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o > diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c > new file mode 100644 > index 0000000..5b1b1eb > --- /dev/null > +++ b/drivers/gpio/gpio-xgene.c > @@ -0,0 +1,236 @@ > +/* > + * AppliedMicro X-Gene SoC GPIO Driver > + * > + * Copyright (c) 2014, Applied Micro Circuits Corporation > + * Author: Feng Kan <fkan@xxxxxxx>. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/spinlock.h> > +#include <linux/platform_device.h> > +#include <linux/of_gpio.h> > +#include <linux/of.h> > +#include <linux/gpio.h> > +#include <linux/types.h> > +#include <linux/clk.h> > +#include <linux/bitops.h> > + > +#define GPIO_SET_DR_OFFSET 0x0C > +#define GPIO_DATA_OFFSET 0x14 > +#define GPIO_BANK_STRIDE 0x0C > + > +#define XGENE_GPIOS_PER_BANK 16 > +#define XGENE_MAX_GPIO_BANKS 3 > +#define XGENE_MAX_GPIOS (XGENE_GPIOS_PER_BANK * XGENE_MAX_GPIO_BANKS) > + > +#define GPIO_BIT_OFFSET(x) (x % XGENE_GPIOS_PER_BANK) > +#define GPIO_BANK_OFFSET(x) ((x / XGENE_GPIOS_PER_BANK) * GPIO_BANK_STRIDE) > + > +struct xgene_gpio; > + > +struct xgene_gpio { > + struct device *dev; > + struct gpio_chip chip; > + void __iomem *base; > + spinlock_t lock; > +#ifdef CONFIG_PM > + u32 set_dr_val[XGENE_MAX_GPIO_BANKS]; > +#endif > +}; > + > +static inline struct xgene_gpio *to_xgene_gpio(struct gpio_chip *chip) > +{ > + return container_of(chip, struct xgene_gpio, chip); > +} > + > +static int xgene_gpio_get(struct gpio_chip *gc, unsigned int offset) > +{ > + struct xgene_gpio *bank = to_xgene_gpio(gc); Technically this is not a "bank" anymore, more like your chip. Applies to all functions. > + unsigned long bank_offset; > + u32 bit_offset; > + > + bank_offset = GPIO_DATA_OFFSET + GPIO_BANK_OFFSET(offset); > + bit_offset = GPIO_BIT_OFFSET(offset); > + return !!(ioread32(bank->base + bank_offset) & BIT(bit_offset)); > +} > + > +static void xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) > +{ > + struct xgene_gpio *bank = to_xgene_gpio(gc); > + unsigned long flags, bank_offset; > + u32 setval, bit_offset; > + > + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); > + bit_offset = GPIO_BIT_OFFSET(offset) + XGENE_GPIOS_PER_BANK; > + > + spin_lock_irqsave(&bank->lock, flags); > + > + setval = ioread32(bank->base + bank_offset); > + if (val) > + setval |= BIT(bit_offset); > + else > + setval &= ~BIT(bit_offset); > + iowrite32(setval, bank->base + bank_offset); > + > + spin_unlock_irqrestore(&bank->lock, flags); > +} > + > +static int xgene_gpio_dir_in(struct gpio_chip *gc, unsigned int offset) > +{ > + struct xgene_gpio *bank = to_xgene_gpio(gc); > + unsigned long flags, bank_offset; > + u32 dirval, bit_offset; > + > + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); > + bit_offset = GPIO_BIT_OFFSET(offset); > + > + spin_lock_irqsave(&bank->lock, flags); > + > + dirval = ioread32(bank->base + bank_offset); > + dirval |= BIT(bit_offset); > + iowrite32(dirval, bank->base + bank_offset); > + > + spin_unlock_irqrestore(&bank->lock, flags); > + > + return 0; > +} > + > +static int xgene_gpio_dir_out(struct gpio_chip *gc, > + unsigned int offset, int val) > +{ > + struct xgene_gpio *bank = to_xgene_gpio(gc); > + unsigned long flags, bank_offset; > + u32 dirval, bit_offset; > + > + bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset); > + bit_offset = GPIO_BIT_OFFSET(offset); > + > + spin_lock_irqsave(&bank->lock, flags); > + > + dirval = ioread32(bank->base + bank_offset); > + dirval &= ~BIT(bit_offset); > + iowrite32(dirval, bank->base + bank_offset); > + > + spin_unlock_irqrestore(&bank->lock, flags); How about the "val" argument? This function is supposed to set the value of the GPIO at the same time as its direction. It looks like you are only setting the direction here. When you fix this, please make sure to do both operations atomically (i.e. do not call xgene_gpio_set() after releasing the spinlock), either by setting the value in the same write if the hardware allows this, or by having a xgene_gpio_set_locked() for the purpose of sharing the code. > + > + return 0; > +} > + > +#ifdef CONFIG_PM > +static int xgene_gpio_suspend(struct device *dev) > +{ > + struct xgene_gpio *gpio = dev_get_drvdata(dev); > + unsigned long bank_offset; > + unsigned int bank; > + > + for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) { > + bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE; > + gpio->set_dr_val[bank] = ioread32(gpio->base + bank_offset); > + } > + return 0; > +} > + > +static int xgene_gpio_resume(struct device *dev) > +{ > + struct xgene_gpio *gpio = dev_get_drvdata(dev); > + unsigned long bank_offset; > + unsigned int bank; > + > + for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) { > + bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE; > + iowrite32(gpio->set_dr_val[bank], gpio->base + bank_offset); > + } > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume); > +#define XGENE_GPIO_PM_OPS (&xgene_gpio_pm) > +#else > +#define XGENE_GPIO_PM_OPS NULL > +#endif > + > +static int xgene_gpio_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct resource *res; > + struct xgene_gpio *gpio; > + int err = 0; > + > + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); > + if (!gpio) { > + err = -ENOMEM; > + goto err; > + } > + gpio->dev = &pdev->dev; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + gpio->base = devm_ioremap_nocache(&pdev->dev, res->start, > + resource_size(res)); > + if (IS_ERR(gpio->base)) { > + err = PTR_ERR(gpio->base); > + goto err; > + } > + > + gpio->chip.ngpio = XGENE_MAX_GPIOS; > + gpio->chip.of_node = np; > + gpio->chip.label = dev_name(&pdev->dev); > + > + gpio->chip.direction_input = xgene_gpio_dir_in; > + gpio->chip.direction_output = xgene_gpio_dir_out; > + gpio->chip.get = xgene_gpio_get; > + gpio->chip.set = xgene_gpio_set; > + > + platform_set_drvdata(pdev, gpio); You set some driver data that is never used in this driver - which reminds me, you do not have a remove function - why is that? Please add one unless you have a good reason to omit it. > + > + err = gpiochip_add(&gpio->chip); > + if (err) { > + dev_err(gpio->dev, > + "failed to register gpiochip.\n"); > + goto err; > + } > + > + dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n"); > + return 0; > +err: > + dev_err(&pdev->dev, "X-Gene GPIO driver registration failed.\n"); > + return err; > +} > + > +#ifdef CONFIG_OF > +static const struct of_device_id xgene_gpio_of_match[] = { > + { .compatible = "apm,xgene-gpio", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, xgene_gpio_of_match); > +#endif > + > +static struct platform_driver xgene_gpio_driver = { > + .driver = { > + .name = "xgene-gpio", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(xgene_gpio_of_match), > + .pm = XGENE_GPIO_PM_OPS, > + }, > + .probe = xgene_gpio_probe, > +}; > + > +module_platform_driver(xgene_gpio_driver); > + > +MODULE_AUTHOR("Feng Kan <fkan@xxxxxxx>"); > +MODULE_DESCRIPTION("APM X-Gene GPIO driver"); > +MODULE_LICENSE("GPL"); > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html