I2C1 controller is available at PE bank, usually used for
connecting an I2C-controlled camera sensor.
Add pinctrl node for it.
Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
arch/arm/boot/dts/sun8i-v3s.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 19fba1a9115b..bae8fa9e356a 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -331,6 +331,12 @@ i2c0_pins: i2c0-pins {
function = "i2c0";
};
+ /omit-if-no-ref/
+ i2c1_pe_pins: i2c1-pe-pins {
+ pins = "PE21", "PE22";
+ function = "i2c1";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
--
2.27.0
