RE: [PATCH v15 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Michael,

> -----Original Message-----
> From: Michael Auchter <michael.auchter@xxxxxx>
> Sent: Monday, September 21, 2020 3:12 PM
> To: Ben Levinsky <BLEVINSK@xxxxxxxxxx>
> Cc: sunnyliangjy@xxxxxxxxx; punit1.agrawal@xxxxxxxxxxxxx; Stefano Stabellini
> <stefanos@xxxxxxxxxx>; Michal Simek <michals@xxxxxxxxxx>;
> devicetree@xxxxxxxxxxxxxxx; mathieu.poirier@xxxxxxxxxx; Ed T. Mooring
> <emooring@xxxxxxxxxx>; linux-remoteproc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; Jiaying Liang <jliang@xxxxxxxxxx>; Michal Simek
> <michals@xxxxxxxxxx>; Ed T. Mooring <emooring@xxxxxxxxxx>; Jason Wu
> <j.wu@xxxxxxxxxx>
> Subject: Re: [PATCH v15 5/5] remoteproc: Add initial zynqmp R5 remoteproc
> driver
> 
> Hey Ben,
> 
> Thanks for sending out the new series, this patchset is functional for
> booting both R5 0 and R5 1 in split mode.
> 
> A few comments below, still working my way through the rest of the code
> though now that this works.
> 
> On Mon, Sep 21, 2020 at 09:14:06AM -0700, Ben Levinsky wrote:
> <...>
> > +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
> > +{
> > +	int ret, i = 0;
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *nc;
> > +
> > +	rpu_mode =  of_get_property(dev->of_node, "lockstep-mode", NULL)
> ?
> > +		    PM_RPU_MODE_LOCKSTEP : PM_RPU_MODE_SPLIT;
> 
> Extra whitespace, and of_property_read_bool would read a bit nicer here
> (does the same thing in the end, though).
> 
> Since rpu_mode is only used here and in r5_set_mode, I think it'd be
> better to plumb it through zynqmp_r5_probe instead of making it global
> in this file.
> 
[Ben Levinsky] will do
> > +
> > +	dev_dbg(dev, "RPU configuration: %s\n",
> > +		rpu_mode == PM_RPU_MODE_LOCKSTEP ? "lockstep" :
> "split");
> > +
> > +	for_each_available_child_of_node(dev->of_node, nc) {
> > +		/*
> > +		 * if 2 RPUs provided but one is lockstep, then we have an
> > +		 * invalid configuration.
> > +		 */
> > +		if (i > 0 && rpu_mode == PM_RPU_MODE_LOCKSTEP)
> > +			return -EINVAL;
> > +
> > +		/* only call zynqmp_r5_probe if proper # of rpu's */
> > +		ret = (i < MAX_RPROCS) ? zynqmp_r5_probe(&rpus[i], pdev,
> nc) :
> > +					 -EINVAL;
> > +		dev_dbg(dev, "%s to probe rpu %pOF\n",
> > +			ret ? "Failed" : "Able",
> > +			nc);
> 
> It'd be cleaner to check the child node count before the loop:
> 
> 	rpu_nodes = of_get_available_child_count(nc)
> 	if ((rpu_mode == PM_RPU_MODE_LOCKSTEP && rpu_nodes != 1) ||
> rpu_nodes > 2)
> 		return -EINVAL;
> 
[Ben Levinsky] will do
> > +
> > +		if (ret)
> > +			return ret;
> > +
> > +		i++;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int zynqmp_r5_remoteproc_remove(struct platform_device *pdev)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < MAX_RPROCS; i++) {
> > +		struct zynqmp_r5_pdata *pdata = &rpus[i];
> > +		struct rproc *rproc;
> > +
> > +		/* only do clean up for pdata with active rpu */
> > +		if (pdata->pnode_id == 0)
> > +			continue;
> 
> This seems like a bit of a hack, resulting from the use of a static
> array for holding the zynqmp_r5_pdata for each rpu.
> 
> Consider allocating zynqmp_r5_pdata in zynqmp_r5_probe, and adding each
> instance to a linked-list at file scope.
> 	- memory is only allocated RPUs actually in use
> 	- no need for this pnode_id == 0 hack
> 	- MAX_RPROCS can be eliminated, just traverse that list in
> 	  remove
> 	- No reuse of the pdata across probe/removes, so all of the e.g.
> 	  condtionals below ("if (rproc)") and NULL assignments can be
> 	  eliminated.
> 
[Ben Levinsky] so parts of this I can do.. 
- can make the rpus a static list of ptr's which I think is equivalent
To what you are describing
- can eliminate the pnode_id == 0 hack

For the rproc_del, rproc_free fn calls, these should stay. Just as other upstream remoteproc drivers do, this is being done similarly.

For mbox handling, I am mimic'ing upstream ST and TI drivers https://github.com/torvalds/linux/blob/v5.9-rc3/drivers/remoteproc/stm32_rproc.c 
they similarly check if the mbox channel is not NULL, and if so call mbox_free_channel. This is similar for Xilinx remoteproc R5 use case as the mbox  can be unused in 1 remoteproc node. Also, similar to TI and ST driver, https://github.com/torvalds/linux/blob/v5.9-rc3/drivers/remoteproc/stm32_rproc.c#L321 , I am setting the mbox to NULL at remove 
> > +
> > +		rproc = pdata->rproc;
> > +		if (rproc) {
> > +			rproc_del(rproc);
> > +			rproc_free(rproc);
> > +			pdata->rproc = NULL;
> > +		}
> > +		if (pdata->tx_chan) {
> > +			mbox_free_channel(pdata->tx_chan);
> > +			pdata->tx_chan = NULL;
> > +		}
> > +		if (pdata->rx_chan) {
> > +			mbox_free_channel(pdata->rx_chan);
> > +			pdata->rx_chan = NULL;
> > +		}
> > +		if (&(&pdata->dev)->dma_pools)
> > +			device_unregister(&pdata->dev);
> 
> The condition here looks very wrong to me, as it will always be true.
> What is this trying to achieve?
> 
This was originally because of the static rpu declaration. By instead using ptr's this can be removed as the zynqmp_r5_pdata ptr will be NULL so I can check that instead. So will remove this.

Thank you for the review
Ben
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/* Match table for OF platform binding */
> > +static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
> > +	{ .compatible = "xlnx,zynqmp-r5-remoteproc-1.0", },
> > +	{ /* end of list */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> > +
> > +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> > +	.probe = zynqmp_r5_remoteproc_probe,
> > +	.remove = zynqmp_r5_remoteproc_remove,
> > +	.driver = {
> > +		.name = "zynqmp_r5_remoteproc",
> > +		.of_match_table = zynqmp_r5_remoteproc_match,
> > +	},
> > +};
> > +module_platform_driver(zynqmp_r5_remoteproc_driver);
> > +
> > +MODULE_AUTHOR("Ben Levinsky <ben.levinsky@xxxxxxxxxx>");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.17.1
> >
> 
> Thanks,
>  Michael




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux