There are 2 chip constants that can be added to the chip-info part. The default output-mode and the VREF mask. When adding new chips to this driver, these can be easily omitted, because these also need to be updated in 2 switch statements. However, if adding them in the chip-info constants, they are updated in a single place and propagated in both switch statements. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/iio/adc/ad9467.c | 62 +++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 33 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index f068256cfca9..85f5a014bd2d 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -88,6 +88,15 @@ enum { ID_AD9467, }; +struct ad9467_chip_info { + struct adi_axi_adc_chip_info axi_adc_info; + unsigned int default_output_mode; + unsigned int vref_mask; +}; + +#define to_ad9467_chip_info(_info) \ + container_of(_info, struct ad9467_chip_info, axi_adc_info) + struct ad9467_state { struct spi_device *spi; struct clk *clk; @@ -186,35 +195,31 @@ static const struct iio_chan_spec ad9467_channels[] = { AD9467_CHAN(0, 0, 16, 'S'), }; -static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = { +static const struct ad9467_chip_info ad9467_chip_tbl[] = { [ID_AD9467] = { - .id = CHIPID_AD9467, - .max_rate = 250000000UL, - .scale_table = ad9467_scale_table, - .num_scales = ARRAY_SIZE(ad9467_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), + .axi_adc_info = { + .id = CHIPID_AD9467, + .max_rate = 250000000UL, + .scale_table = ad9467_scale_table, + .num_scales = ARRAY_SIZE(ad9467_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), + }, + .default_output_mode = AD9467_DEF_OUTPUT_MODE, + .vref_mask = AD9467_REG_VREF_MASK, }, }; static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) { const struct adi_axi_adc_chip_info *info = conv->chip_info; + const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info); struct ad9467_state *st = adi_axi_adc_conv_priv(conv); - unsigned int i, vref_val, vref_mask; + unsigned int i, vref_val; vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF); - switch (info->id) { - case CHIPID_AD9467: - vref_mask = AD9467_REG_VREF_MASK; - break; - default: - vref_mask = 0xFFFF; - break; - } - - vref_val &= vref_mask; + vref_val &= info1->vref_mask; for (i = 0; i < info->num_scales; i++) { if (vref_val == info->scale_table[i][1]) @@ -316,18 +321,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) return ad9467_outputmode_set(st->spi, st->output_mode); } -static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id) -{ - switch (chip_id) { - case CHIPID_AD9467: - st->output_mode = AD9467_DEF_OUTPUT_MODE | - AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; - return 0; - default: - return -ENODEV; - } -} - static void ad9467_clk_disable(void *data) { struct ad9467_state *st = data; @@ -337,7 +330,7 @@ static void ad9467_clk_disable(void *data) static int ad9467_probe(struct spi_device *spi) { - const struct adi_axi_adc_chip_info *info; + const struct ad9467_chip_info *info; struct adi_axi_adc_conv *conv; struct ad9467_state *st; unsigned int id; @@ -386,7 +379,7 @@ static int ad9467_probe(struct spi_device *spi) spi_set_drvdata(spi, st); - conv->chip_info = info; + conv->chip_info = &info->axi_adc_info; id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID); if (id != conv->chip_info->id) { @@ -400,7 +393,10 @@ static int ad9467_probe(struct spi_device *spi) conv->read_raw = ad9467_read_raw; conv->preenable_setup = ad9467_preenable_setup; - return ad9467_setup(st, id); + st->output_mode = info->default_output_mode | + AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + + return 0; } static const struct of_device_id ad9467_of_match[] = { -- 2.17.1