[PATCH v4 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kishon Vijay Abraham I <kishon@xxxxxx>

First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 8e534ef8a3f5..6ab9d5d33a72 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/mux/ti-serdes.h>
 
 / {
 	chosen {
@@ -139,3 +140,8 @@
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
+
+&serdes_ln_ctrl {
+	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux