Rename LED controller subnodes to format "led@[0-6]" or "gpio@[0-6]" to
conform to the new YAML defined binding.
Use the `gpio-line-names` property to define GPIO names.
Signed-off-by: Marek Behún <marek.behun@xxxxxx>
Cc: NeilBrown <neilb@xxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Adam Ford <aford173@xxxxxxxxx>
Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/omap3-gta04.dtsi | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ecc45862b4f34..a28fe1b07215c 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -541,28 +541,30 @@ tca6507: tca6507@45 {
gpio-controller;
#gpio-cells = <2>;
- gta04_led0: red_aux@0 {
+ gpio-line-names = "wifi_reset@6";
+
+ gta04_led0: led@0 {
label = "gta04:red:aux";
reg = <0x0>;
};
- gta04_led1: green_aux@1 {
+ gta04_led1: led@1 {
label = "gta04:green:aux";
reg = <0x1>;
};
- gta04_led3: red_power@3 {
+ gta04_led3: led@3 {
label = "gta04:red:power";
reg = <0x3>;
linux,default-trigger = "default-on";
};
- gta04_led4: green_power@4 {
+ gta04_led4: led@4 {
label = "gta04:green:power";
reg = <0x4>;
};
- wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
+ wifi_reset: gpio@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
reg = <0x6>;
compatible = "gpio";
};
--
2.26.2
