Re: [PATCH v2 04/20] dt-bindings:iio:adc: aspeed,ast2400 yaml conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 19 Sep 2020 14:47:04 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:

> On Wed, 16 Sep 2020 15:17:51 +0100
> Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:
> 
> > On Wed, 16 Sep 2020 12:39:36 +0000
> > Joel Stanley <joel@xxxxxxxxx> wrote:
> >   
> > > On Wed, 16 Sep 2020 at 10:38, Jonathan Cameron
> > > <Jonathan.Cameron@xxxxxxxxxx> wrote:    
> > > >
> > > > On Thu, 10 Sep 2020 02:32:19 +0000
> > > > Joel Stanley <joel@xxxxxxxxx> wrote:
> > > >      
> > > > > On Wed, 9 Sep 2020 at 18:02, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:      
> > > > > >
> > > > > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > > > > >
> > > > > > Simple txt to yaml conversion. Part of a general move to convert
> > > > > > all the IIO bindings over to yaml.
> > > > > >
> > > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > > > > > Cc: Rick Altherr <raltherr@xxxxxxxxxx>
> > > > > > Cc: Joel Stanley <joel@xxxxxxxxx>
> > > > > > Cc: Andrew Jeffery <andrew@xxxxxxxx>      
> > > > >
> > > > > Acked-by: Joel Stanley <joel@xxxxxxxxx>
> > > > >
> > > > >      
> > > > > > ---
> > > > > >  .../bindings/iio/adc/aspeed,ast2400-adc.yaml  | 54 +++++++++++++++++++
> > > > > >  .../bindings/iio/adc/aspeed_adc.txt           | 22 --------
> > > > > >  2 files changed, 54 insertions(+), 22 deletions(-)
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000000..09018487d690
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml      
> > > > >
> > > > > This naming doesn't make sense, as the bindings are for the ast2500
> > > > > too (and they also apply for the ast2600).      
> > > >
> > > > Convention is to name after a supported device and not use
> > > > wild cards or generic names because the chances of it going
> > > > wrong in future is far too high. Will every aspeed adc look the same?
> > > > Seems impossible to predict so best we can do safely is to pick a
> > > > part number.      
> > > 
> > > It already supports three different generations of SoC, which I was
> > > bringing to your attention. Therefore having the name '2400' is
> > > already incorrect.    
> > 
> > I'm happy to change it to a specific part number of your choice but you
> > have to chose one.  The file name is not a list of all the parts supported.
> > 
> > There are bindings that attach to hundreds of different part numbers but the
> > file is named after a specific one.  Normally the first part supported
> > is the one chosen (because the binding is normally written at that time).
> >   
> If we later decide to rename this then fair enough, but for now I've
> applied the patch as it stands to the togreg branch of iio.git and
> pushed out as testing for the autobuilders to possibly poke at it.
> 
> Note I made the change Rob pointed out whilst applying.
Gah. I forgot that Rick's email address is bouncing. 
I've switched the listed maintainer to Joel.  Hope that's fine with
you Joel.  If not we change it to someone more appropriate or fall back
to me.

thanks,

Jonathan

> 
> Thanks,
> 
> Jonathan
> 
> > Jonathan
> >   
> > >     
> > > >
> > > > There are enormous numbers of examples of this in dt bindings and
> > > > for that matter driver naming.
> > > >
> > > > Thanks,
> > > >
> > > > Jonathan
> > > >
> > > >      
> > > > >      
> > > > > > @@ -0,0 +1,54 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml#
> > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > +
> > > > > > +title: ADC that forms part of an ASPEED server management processor.
> > > > > > +
> > > > > > +maintainers:
> > > > > > +  - Rick Altherr <raltherr@xxxxxxxxxx>
> > > > > > +
> > > > > > +description:
> > > > > > +  This device is a 10-bit converter for 16 voltage channels.  All inputs are
> > > > > > +  single ended.
> > > > > > +
> > > > > > +properties:
> > > > > > +  compatible:
> > > > > > +    enum:
> > > > > > +      - aspeed,ast2400-adc
> > > > > > +      - aspeed,ast2500-adc
> > > > > > +
> > > > > > +  reg:
> > > > > > +    maxItems: 1
> > > > > > +
> > > > > > +  clocks:
> > > > > > +    description:
> > > > > > +      Input clock used to derive the sample clock. Expected to be the
> > > > > > +      SoC's APB clock.
> > > > > > +
> > > > > > +  resets: true
> > > > > > +
> > > > > > +  "#io-channel-cells":
> > > > > > +    const: 1
> > > > > > +
> > > > > > +required:
> > > > > > +  - compatible
> > > > > > +  - reg
> > > > > > +  - clocks
> > > > > > +  - resets
> > > > > > +  - "#io-channel-cells"
> > > > > > +
> > > > > > +additionalProperties: false
> > > > > > +
> > > > > > +examples:
> > > > > > +  - |
> > > > > > +    #include <dt-bindings/clock/aspeed-clock.h>
> > > > > > +    adc@1e6e9000 {
> > > > > > +        compatible = "aspeed,ast2400-adc";
> > > > > > +        reg = <0x1e6e9000 0xb0>;
> > > > > > +        clocks = <&syscon ASPEED_CLK_APB>;
> > > > > > +        resets = <&syscon ASPEED_RESET_ADC>;
> > > > > > +        #io-channel-cells = <1>;
> > > > > > +    };
> > > > > > +...
> > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> > > > > > deleted file mode 100644
> > > > > > index 034fc2ba100e..000000000000
> > > > > > --- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> > > > > > +++ /dev/null
> > > > > > @@ -1,22 +0,0 @@
> > > > > > -Aspeed ADC
> > > > > > -
> > > > > > -This device is a 10-bit converter for 16 voltage channels.  All inputs are
> > > > > > -single ended.
> > > > > > -
> > > > > > -Required properties:
> > > > > > -- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
> > > > > > -- reg: memory window mapping address and length
> > > > > > -- clocks: Input clock used to derive the sample clock. Expected to be the
> > > > > > -          SoC's APB clock.
> > > > > > -- resets: Reset controller phandle
> > > > > > -- #io-channel-cells: Must be set to <1> to indicate channels are selected
> > > > > > -                     by index.
> > > > > > -
> > > > > > -Example:
> > > > > > -       adc@1e6e9000 {
> > > > > > -               compatible = "aspeed,ast2400-adc";
> > > > > > -               reg = <0x1e6e9000 0xb0>;
> > > > > > -               clocks = <&syscon ASPEED_CLK_APB>;
> > > > > > -               resets = <&syscon ASPEED_RESET_ADC>;
> > > > > > -               #io-channel-cells = <1>;
> > > > > > -       };
> > > > > > --
> > > > > > 2.28.0
> > > > > >      
> > > >
> > > >      
> > 
> >   
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux