tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
sound/soc/codecs/tas2770.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index c09851834395..03d7ad1885b8 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -575,6 +575,8 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
tas2770->component = component;
+ tas2770_reset(tas2770);
+
return 0;
}
@@ -771,8 +773,6 @@ static int tas2770_i2c_probe(struct i2c_client *client,
tas2770->channel_size = 0;
tas2770->slot_width = 0;
- tas2770_reset(tas2770);
-
result = tas2770_register_codec(tas2770);
if (result)
dev_err(tas2770->dev, "Register codec failed.\n");
--
2.28.0
