Document the requirements for the CMN-600 DT binding. The internal topology is almost entirely discoverable by walking a tree of ID registers, but sadly both the starting point for that walk and the exact format of those registers are configuration-dependent and not discoverable from some sane fixed location. Oh well. Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx> --- v2: fix filename, license and whitespace per Rob's comments .../devicetree/bindings/perf/arm,cmn.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/perf/arm,cmn.yaml diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml new file mode 100644 index 000000000000..15689cbf417d --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm-cmn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CMN (Coherent Mesh Network) Performance Monitors + +maintainers: + - Robin Murphy <robin.murphy@xxxxxxx> + +properties: + compatible: + const: arm,cmn-600 + + reg: + items: + - description: Physical address of the base (PERIPHBASE) and + size (up to 64MB) of the configuration address space. + + interrupts: + minItems: 1 + maxItems: 4 + items: + - description: Overflow interrupt for DTC0 + - description: Overflow interrupt for DTC1 + - description: Overflow interrupt for DTC2 + - description: Overflow interrupt for DTC3 + description: One interrupt for each DTC domain implemented must + be specified, in order. DTC0 is always present. + + arm,root-node: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset from PERIPHBASE of the configuration + discovery node (see TRM definition of ROOTNODEBASE). + +required: + - compatible + - reg + - interrupts + - arm,root-node + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmu@50000000 { + compatible = "arm,cmn-600"; + reg = <0x50000000 0x4000000>; + /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */ + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + arm,root-node = <0x104000>; + }; +... -- 2.28.0.dirty
