GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
Not tested on HW.
Changes since v1:
1. Correct title
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 5 +++--
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 3 ++-
arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts | 3 ++-
arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 3 ++-
4 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index cce1b595e2d6..af139b283daf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/usb/pd.h"
#include "imx8mq.dtsi"
@@ -60,7 +61,7 @@
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
- interrupts = <8 GPIO_ACTIVE_LOW>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
linux,code = <KEY_PHONE>;
};
@@ -288,7 +289,7 @@
#clock-cells = <0>;
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 56295dd2fa8f..0c13b70192af 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/usb/pd.h"
#include "imx8mq.dtsi"
@@ -640,7 +641,7 @@
clock-names = "osc";
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <7 GPIO_ACTIVE_LOW>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index d6d3a3d5abc3..a3b9d615a3b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Google i.MX8MQ Phanbell";
@@ -125,7 +126,7 @@
clocks = <&pmic_osc>;
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
index f4d5748a7bd6..89cbec5c41b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TechNexion PICO-PI-8M";
@@ -70,7 +71,7 @@
clock-names = "osc";
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "irq";
regulators {
--
2.17.1
