dtschema for GPIO controllers expects GPIO hogs to end with 'hog'
suffix.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 8 ++++----
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index e559ab0c3645..ec8ca3ac2c1c 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -451,7 +451,7 @@
"", "", "", "",
"", "", "", "";
- unused-sd3-wp-gpio {
+ unused-sd3-wp-hog {
/*
* See pinctrl_esdhc1 below for more details on this
*/
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 66b15748e287..c0a76202e16b 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -330,28 +330,28 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- usb-emulation {
+ usb-emulation-hog {
gpio-hog;
gpios = <19 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};
- usb-mode1 {
+ usb-mode1-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};
- usb-pwr {
+ usb-pwr-hog {
gpio-hog;
gpios = <22 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};
- usb-mode2 {
+ usb-mode2-hog {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index a0bbec57ddc7..3ec042bfccba 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -110,7 +110,7 @@
};
&gpio5 {
- emmc-usd-mux {
+ emmc-usd-mux-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_LOW>;
output-high;
--
2.17.1
