Re: [PATCH 1/3 v3] dt-bindings: abx80x: Add autocal-filter property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kevin,

nitpick, the subject prefix should be dt-bindings: prefix: abx80x:

On 13/07/2020 18:05:34-0400, Kevin P. Fleming wrote:
> On Mon, Jul 13, 2020 at 2:39 PM Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > On Mon, Jun 15, 2020 at 06:51:11AM -0400, Kevin P. Fleming wrote:
> > > Add a property to allow control of the autocalibration filter
> > > capacitor.
> > >
> > > Signed-off-by: Kevin P. Fleming <kevin+linux@xxxxxxx>
> > > Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
> > > Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> > > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > > To: linux-rtc@xxxxxxxxxxxxxxx
> > > To: devicetree@xxxxxxxxxxxxxxx
> > > ---
> > > v3: corrected whitespace
> > >  Documentation/devicetree/bindings/rtc/abracon,abx80x.txt | 8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> > > index 2405e35a1bc0f..1b606e33d1a83 100644
> > > --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> > > +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> > > @@ -29,3 +29,11 @@ and valid to enable charging:
> > >   - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> > >   - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> > >                            resistor, the other values are in kOhm.
> > > +
> > > +All of the devices can have a 47pf capacitor attached to increase the
> > > +autocalibration accuracy of their RC oscillators. To enable or disable usage
> > > +of the capacitor the following property can be defined:
> > > +
> > > + - "abracon,autocal-filter": should be <0> or <1>. 0 indicates that there
> > > +                             is no capacitor attached, 1 indicates that there
> > > +                             is a capacitor attached.
> >
> > What does not present mean? If you don't have a defined meaning (such
> > as maintain the default/bootloader initialized setting), then make this
> > boolean.
> 
> That is the intended meaning (leave the current setting unmodified). I
> can add that to the documentation so it is clear.

Can you do that and send v4 please?

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux