Sort nodes by unit address so we have a consistent order in pm8916.dtsi.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8916.dtsi | 60 ++++++++++++++--------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index c7b22ac81452..f931cb0de231 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -12,13 +12,6 @@ pm8916_0: pmic@0 {
#address-cells = <1>;
#size-cells = <0>;
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- };
-
pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
@@ -48,28 +41,6 @@ watchdog {
};
};
- pm8916_gpios: gpios@c000 {
- compatible = "qcom,pm8916-gpio";
- reg = <0xc000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
- <0 0xc1 0 IRQ_TYPE_NONE>,
- <0 0xc2 0 IRQ_TYPE_NONE>,
- <0 0xc3 0 IRQ_TYPE_NONE>;
- };
-
- pm8916_mpps: mpps@a000 {
- compatible = "qcom,pm8916-mpp";
- reg = <0xa000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
- <0 0xa1 0 IRQ_TYPE_NONE>,
- <0 0xa2 0 IRQ_TYPE_NONE>,
- <0 0xa3 0 IRQ_TYPE_NONE>;
- };
-
pm8916_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
@@ -111,6 +82,35 @@ adc-chan@f {
reg = <VADC_VDD_VADC>;
};
};
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pm8916_mpps: mpps@a000 {
+ compatible = "qcom,pm8916-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
+ };
};
pm8916_1: pmic@1 {
--
2.28.0
