On Fri, Sep 04, 2020 at 04:53:05PM +0200, Krzysztof Kozlowski wrote: > Add common properties appearing in DTSes (clock-names, > clock-output-names) to fix dtbs_check warnings like: > > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: > pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > --- > .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > index 65018a019e1d..ecce0d5e3a95 100644 > --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > @@ -32,9 +32,15 @@ properties: > clocks: > maxItems: 1 > > + clock-names: > + maxItems: 1 Needs to define what the name is. > + > "#clock-cells": > const: 0 > > + clock-output-names: > + maxItems: 1 Ideally this one too, but we've been more flexible on it. > + > # The BD718x7 supports two different HW states as reset target states. States > # are called as SNVS and READY. At READY state all the PMIC power outputs go > # down and OTP is reload. At the SNVS state all other logic and external > -- > 2.17.1 >
