Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on
the IPQ806x family of SoCs.
Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/phy/qcom-phy.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/qcom-phy.txt b/Documentation/devicetree/bindings/phy/qcom-phy.txt
new file mode 100644
index 0000000..76bfbd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-phy.txt
@@ -0,0 +1,23 @@
+Qualcomm IPQ806x SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: must be exactly one entry
+- clock-names: must be "cfg"
+
+Example:
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
