From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> This patch adds the device-tree binding documentation for the Microchip MCP25xxFD SPI CAN controller family. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- .../bindings/net/can/microchip,mcp25xxfd.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml new file mode 100644 index 000000000000..aa2cad14d6d7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree + bindings + +maintainers: + - Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> + +properties: + compatible: + oneOf: + - const: microchip,mcp2517fd + description: for MCP2517FD + - const: microchip,mcp2518fd + description: for MCP2518FD + - const: microchip,mcp25xxfd + description: to autodetect chip variant + + reg: + maxItems: 1 + + interrupts-extended: + maxItems: 1 + + clocks: + maxItems: 1 + + vdd-supply: + description: Regulator that powers the CAN controller. + maxItems: 1 + + xceiver-supply: + description: Regulator that powers the CAN transceiver. + maxItems: 1 + + microchip,rx-int-gpios: + description: + GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which + signals a pending RX interrupt. + maxItems: 1 + + spi-max-frequency: + description: + Must be half or less of "clocks" frequency. + maximum: 20000000 + +required: + - compatible + - reg + - interrupts-extended + - clocks + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + can@0 { + compatible = "microchip,mcp25xxfd"; + reg = <0>; + clocks = <&can0_osc>; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + spi-max-frequency = <20000000>; + interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>; + microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + }; + }; -- 2.17.1