Add YAML device tree bindings for Analog Devices Inc. ADDI9036 CCD TOF front-end. Signed-off-by: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx> --- .../bindings/media/i2c/adi,addi9036.yaml | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml new file mode 100644 index 000000000000..8af7f397d4e0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adi,addi9036.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADDI9036 VGA CCD Time of Flight Sensor + +maintainers: + - Bogdan Togorean <bogdan.togorean@xxxxxxxxxx> + +description: |- + The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled + device (CCD) time of flight (TOF) imaging applications. It is programmable + through I2C interface. Image data is sent through MIPI CSI-2 2 lanes and + can output two RAW12 packed data streams. One is IR and the other is Depth. + Each data stream is on a separate or same MIPI Virtual Channel, depending + on configuration and each have 640x480 resolution. + +properties: + compatible: + const: adi,addi9036 + + reset-gpios: + description: |- + Reference to the GPIO connected to the RST/SYNC pin, if any. + Must be released (set high) after all supplies are applied. + + # See ../video-interfaces.txt for more details + port: + type: object + properties: + endpoint: + type: object + properties: + data-lanes: + description: |- + The sensor supports two-lane operation. + For two-lane operation the property must be set to <1 2>. + items: + - const: 1 + - const: 2 + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + addi9036: addi9036_tof@64 { + compatible = "adi,addi9036"; + reg = <0x64>; + + reset-gpios = <&gpio 41 1>; + + port { + addi9036_ep: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + }; + }; + }; + }; + +... -- 2.28.0
