The SPI controllers are not accessible if the mux isn't set. Therefore, check the mux status before starting a transfer and fail out if it isn't set. Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> Signed-off-by: Joel Stanley <joel@xxxxxxxxx> --- drivers/spi/spi-fsi.c | 40 +++++++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 13 deletions(-) diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c index a702e9d7d68c..8a440c7078ef 100644 --- a/drivers/spi/spi-fsi.c +++ b/drivers/spi/spi-fsi.c @@ -12,6 +12,7 @@ #define FSI_ENGID_SPI 0x23 #define FSI_MBOX_ROOT_CTRL_8 0x2860 +#define FSI_MBOX_ROOT_CTRL_8_SPI_MUX 0xf0000000 #define FSI2SPI_DATA0 0x00 #define FSI2SPI_DATA1 0x04 @@ -84,6 +85,26 @@ struct fsi_spi_sequence { u64 data; }; +static int fsi_spi_check_mux(struct fsi_device *fsi, struct device *dev) +{ + int rc; + u32 root_ctrl_8; + __be32 root_ctrl_8_be; + + rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8_be, + sizeof(root_ctrl_8_be)); + if (rc) + return rc; + + root_ctrl_8 = be32_to_cpu(root_ctrl_8_be); + dev_dbg(dev, "Root control register 8: %08x\n", root_ctrl_8); + if ((root_ctrl_8 & FSI_MBOX_ROOT_CTRL_8_SPI_MUX) == + FSI_MBOX_ROOT_CTRL_8_SPI_MUX) + return 0; + + return -ENOLINK; +} + static int fsi_spi_check_status(struct fsi_spi *ctx) { int rc; @@ -449,11 +470,15 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx) static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *mesg) { - int rc = 0; + int rc; u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1); struct spi_transfer *transfer; struct fsi_spi *ctx = spi_controller_get_devdata(ctlr); + rc = fsi_spi_check_mux(ctx->fsi, ctx->dev); + if (rc) + return rc; + list_for_each_entry(transfer, &mesg->transfers, transfer_list) { struct fsi_spi_sequence seq; struct spi_transfer *next = NULL; @@ -537,24 +562,13 @@ static size_t fsi_spi_max_transfer_size(struct spi_device *spi) static int fsi_spi_probe(struct device *dev) { int rc; - u32 root_ctrl_8; struct device_node *np; int num_controllers_registered = 0; struct fsi_device *fsi = to_fsi_dev(dev); - /* - * Check the SPI mux before attempting to probe. If the mux isn't set - * then the SPI controllers can't access their slave devices. - */ - rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8, - sizeof(root_ctrl_8)); + rc = fsi_spi_check_mux(fsi, dev); if (rc) - return rc; - - if (!root_ctrl_8) { - dev_dbg(dev, "SPI mux not set, aborting probe.\n"); return -ENODEV; - } for_each_available_child_of_node(dev->of_node, np) { u32 base; -- 2.26.2